Ads
related to: air hose nozzles high pressure shutamazon.com has been visited by 1M+ users in the past month
Search results
Results From The WOW.Com Content Network
The nozzle is opened by external force, independent of the melt-pressure. The shut-off nozzle’s actuation is hydraulically or pneumatically driven. Externally actuated shut-off nozzles can have different ways of closing the melt stream.
The systems used to supply air through the hose to a demand valve mouthpiece, are either 12-volt electrical air pumps, gasoline engine powered low-pressure compressors, or floating scuba cylinders with high pressure regulators. These hookah diving systems usually limit the hose length to allow less than 7 metres depth.
Convergent nozzles accelerate subsonic fluids. If the nozzle pressure ratio is high enough, then the flow will reach sonic velocity at the narrowest point (i.e. the nozzle throat). In this situation, the nozzle is said to be choked. Increasing the nozzle pressure ratio further will not increase the throat Mach number above one.
One side is connected to a flexible supply hose; the other may be attached to a manifold, valve, tool, or another hose. A female coupler is used on the supply side, and a male nipple is used on the receiving side. Fitting profiles have identifiable geometry on the male end, but care must be taken to use a compatible coupler.
Applied using eductor or compressed air foam system (CAFS) and pumped through fire hose to a foam nozzle (or sometimes a less-effective fog nozzle). Attack hose (Attack line) A use classification of a fire fighting hose connected to output of a pump or other pressure source (e.g., gravity). Fire hose used to apply water or other fire fighting ...
Common garden hose trigger nozzles are a simple example of the plug nozzle and its method of operation. In this example the nozzle consists of a conical or bell shaped opening with a plug on a movable rod positioned in front of the nozzle. The plug looks similar to a poppet valve. The stem of the valve runs back through the body of the nozzle ...