Search results
Results From The WOW.Com Content Network
Early 1440p computer displays became commonly available in 2010. Dell's UltraSharp U2711 monitor was released in 2010 as WQHD, with a 1440p widescreen. [1] The 27-inch Apple LED Cinema Display released in 2010 also had a native resolution of 2560 × 1440, as did the Apple Thunderbolt Display which was sold from July 2011 to June 2016.
This chart shows the most common display resolutions, with the color of each resolution type indicating the display ratio (e.g., red indicates a 4:3 ratio). This article lists computer monitor, television, digital film, and other graphics display resolutions that are in common use. Most of them use certain preferred numbers.
[1] [75] This display resolution is the "next step" above the XGA resolution that IBM developed in 1990. The 1280 × 1024 resolution is not the standard 4:3 aspect ratio, instead it is a 5:4 aspect ratio (1.25:1 instead of 1. 3:1). A standard 4:3 monitor using this resolution will have rectangular rather than square pixels, meaning that unless ...
The base resolution increased by increasing the width and keeping the height constant, for square or near-square pixels on a widescreen display, usually with an aspect ratio of either 16:9 (adding an extra 1/3rd width vs a standard 4:3 display) or 16:10 (adding an extra 1/5th).
1 if display supports underscan, 0 if not Bit 6: 1 if display supports basic audio, 0 if not Bit 5: 1 if display supports YC B C R 4∶4∶4, 0 if not Bit 4: 1 if display supports YC B C R 4∶2∶2, 0 if not Bit 3–0: Total number of native formats in the DTDs included in this block 4–126
The display aspect ratio (DAR) is calculated from the physical width and height of a display, measured each in inch or cm (Display size). The pixel aspect ratio (PAR) is calculated from the width and height of one pixel. The storage aspect ratio (SAR) is calculated from the numbers of pixels in width and height stated in the display resolution.
1080p progressive scan HDTV, which uses a 16:9 ratio. Some commentators also use display resolution to indicate a range of input formats that the display's input electronics will accept and often include formats greater than the screen's native grid size even though they have to be down-scaled to match the screen's parameters (e.g. accepting a 1920 × 1080 input on a display with a native 1366 ...
The GDI system in Windows is pixel-based and thus not resolution-independent. To scale up the UI, Microsoft Windows has supported specifying a custom DPI from the Control Panel since Windows 95. [4] (In Windows 3.1, the DPI setting is tied to the screen resolution, depending on the driver information file.) When a custom system DPI is specified ...