Ad
related to: utility flatbed trailer parts schematic manual model 3 kit car
Search results
Results From The WOW.Com Content Network
M1073 trailer, flat bed, general purpose, 7.5-ton M1074 truck, palletized loading, 10 × 10 with material handling crane and 20K winch – palletized load system M1075 truck, palletized loading, 10 x 10 w/o material handling crane – palletized load system
AEC also produced a larger 6×6 vehicle, model O854, based on components from both the AEC Marshal 6x4 and the 4×4 Matador. These were produced in both petrol and diesel and were also referred to as Matadors. [citation needed] The O854 provided the basis for the O857. A small number of Petrol-engined 4x4 Matadors were also built.
Spine car with one pup trailer. A flatcar (US) (also flat car, [1] or flatbed) is a piece of rolling stock that consists of an open, flat deck mounted on trucks (US) or bogies (UK) at each end. Occasionally, flat cars designed to carry extra heavy or extra large loads are mounted on a pair (or rarely, more) of bogies under each end.
All Mules had three-speed manual, non-synchromesh transmissions with two-speed transfer cases, and were four-wheel drive vehicles. All Mules except the A5 variants had four-wheel steering. Only the A5 variants had electric ignition as standard. They had no suspension aside from the low-pressure tires and the seat cushions.
The name Utility was adopted after the company had pivoted toward the manufacturing of trailers for the burgeoning diesel truck market of the early 20th century; most of Utility's clientele were California's original utility companies, and the name stuck. [3] Ownership of Utility has remained within the Bennett family since its founding. [4]
A survey of nearly 600 kit car owners in the US, the UK and Germany, carried out by Dr. Ingo Stüben, showed that typically 100–1,500 hours are required to build a kit car, depending upon the model and the completeness of the kit. [5] As the complexity of the kits offered continues to increase, build times have increased.
Flatbed trailer In North America, the length is commonly 48 or 53 feet (14.63 or 16.15 m), and the width is either 96 or 192 inches (2.44 or 4.88 m) (including rub rails and stake pockets on the sides, which generally placed every 2 feet or 61 cm).
In 1981, Bedford introduced turbocharging to the "Red Series" 3.6-litre and 5.4-litre diesel engines, now producing 72 bhp and 102 bhp respectively. [5] TKs were assembled for many years by General Motors New Zealand (GMNZ) at its Petone truck plant. The model was very popular and competed with the like of the also locally assembled Ford D series.