When.com Web Search

  1. Ads

    related to: 1 4 drip irrigation connectors with green end

Search results

  1. Results From The WOW.Com Content Network
  2. Garden hose - Wikipedia

    en.wikipedia.org/wiki/Garden_hose

    This fitting is used with 1 ⁄ 2-inch, 5 ⁄ 8-inch, and 3 ⁄ 4-inch hoses. [4] [5] In other countries, a British Standard Pipe (BSP) thread is used, which is 3 ⁄ 4 inch (19 mm) and 14 TPI (male part outside diameter is 26.441 mm or 1.04 in). The GHT and BSP standards are not compatible, and attempting to connect a GHT hose to a BSP fitting ...

  3. Drip irrigation - Wikipedia

    en.wikipedia.org/wiki/Drip_irrigation

    Depending on how well designed, installed, maintained, and operated it is, a drip irrigation system can be more efficient than other types of irrigation systems, such as surface irrigation or sprinkler irrigation. As of 2023, 3% of the world's farmers use drip irrigation. [1]

  4. Micro-irrigation - Wikipedia

    en.wikipedia.org/wiki/Micro-irrigation

    Micro-irrigation, also called Micro-spray,localized, low-volume, low-flow, or trickle irrigation, is an irrigation method with lower water pressure and flow than a traditional sprinkler system. Low-volume irrigation is used in agriculture for row crops , orchards , and vineyards .

  5. Center-pivot irrigation - Wikipedia

    en.wikipedia.org/wiki/Center-pivot_irrigation

    A small center pivot system from beginning to end. Irrigation equipment can also be configured to move in a straight line, where it is termed a lateral move, linear move, wheel move or side-roll irrigation system. [11] [12] In these systems the water is supplied by an irrigation channel running the length of the field. The channel is positioned ...

  6. Hose coupling - Wikipedia

    en.wikipedia.org/wiki/Hose_coupling

    In 1959 [8] Hozelock Ltd in the United Kingdom invented and patented the international standard plastic, click-on style, push-fit hose end connector now used with garden hoses. The concept was developed to replace metal hose end connectors in coal mines, which were prone to cause static sparks and the possibility of methane gas explosions.

  7. Piping and plumbing fitting - Wikipedia

    en.wikipedia.org/wiki/Piping_and_plumbing_fitting

    Flare connection: 1) Screw thread; 2) O-ring; 3) Body; 4) Nut; 5) Seal interface; 6) Support ring (sleeve), and 7) Flared tubing. Flared connectors should not be confused with compression connectors, which are generally not interchangeable. Lacking a compression ring, they use a tapered conical shaped connection instead. A specialized flaring ...

  1. Ad

    related to: 1 4 drip irrigation connectors with green end