Search results
Results From The WOW.Com Content Network
It was the first transverse 2.8 L (2,837 cc) to use multiport fuel injection, and was a High Output ("9-code") engine option for the higher performance A-cars, X-cars, and Pontiac Fiero. This engine produced 140 hp (104 kW) at 5200 rpm and 170 lb⋅ft (230 N⋅m) of torque at 3600 rpm.
The 2.2l S10/Sonoma had the starter located in the same position as front wheel drive cars. A rear wheel drive bellhousing is displayed at right, and the integrated front wheel drive bellhousing is displayed at the lower right (in this case, as a part of the GM 6T70 Transmission). GM 60-Degree 2.8/3.1/3.4/3.5/3.9 L V6 (also used by AMC) Buick ...
2.8 L turbo V6 in a 2006 Saab 9-3. This engine is also known as a A28NET, Z28NET, Z28NEL or B284. The LP9 is a 2.8L turbocharged version used for the Saab 9-3, Saab 9-5, and other GM vehicles. It has the same bore and stroke as the naturally aspirated LP1, however the compression ratio is reduced to 9.5:1. The engine is manufactured at Holden's ...
Straight-six engines typically use a firing order of 1-5-3-6-2-4. However, a firing order of 1-2-4-6-5-3 is common on medium-speed marine engines. V6 engines with an angle of 90 degrees between the cylinder banks have used a firing orders of R1-L2-R2-L3-L1-R3 or R1-L3-R3-L2-R2-L1. Several V6 engines with an angle of 60 degrees have used a ...
The Group 1 engines were the smallest in displacement and outer dimensions, and differed most significantly from the larger Group 2 and Group 3 engines by having only four main bearings (whereas the Group 2 and 3 engines had seven) [1]: 15 and a different firing order (1-5-3-6-2-4, whereas the others are 1-4-2-6-3-5).
The 153 cu in engine had a 3 + 7 ⁄ 8-inch (98 mm) bore and 3 + 1 ⁄ 4-inch (82.6 mm) stroke, with two overhead valves per cylinder actuated by pushrods and a 1-3-4-2 firing order. The Chevy II's 194 cu in six-cylinder used a 3 + 9 ⁄ 16-inch (90.5 mm) bore, which by 1964 was enlarged to match the 153 four-cylinder's resulting in a ...
The fuel system operates by plunger and nozzle and is of the high pressure solid injection type (Zexel in-line Bosch A-type). The starter motor is a 12 V unit. The firing order 1-3-4-2. 18.6 48 kW (65 PS) at 2500 rpm 205 N⋅m (151 lb⋅ft; 20.9 kg⋅m) OHV 4JG1T The 4JG1T engine is a turbocharged version of the 4JG1. Notable differences ...
Dubbed EcoTec3, the 4.3 L (260 cu in) is a Generation V small block V6 truck engine. It gets its displacement from bore and stroke of 99.6 mm × 92 mm (3.921 in × 3.622 in) with a compression ratio of 11.0 to 1. Firing order is 1-6-5-4-3-2. [85] This engine replaces the unrelated 4.3L V6 whose lineage dates back to 1978.