Ads
related to: ghp chat 3.5 mm to 4 pin connector schematic
Search results
Results From The WOW.Com Content Network
A two-pin version, known to the telecom industry as a "310 connector", consists of two 1 ⁄ 4-inch phone plugs at a centre spacing of 5 ⁄ 8 inch (16 mm). The socket versions of these can be used with normal phone plugs provided the plug bodies are not too large, but the plug version will only mate with two sockets at 5 ⁄ 8 inches centre ...
1 Mini-DIN 4-pin, 1 Mini-DIN 7-pin, 1 Mini-VGA, 2 BNC, 2 RCA connectors, 8-pin DIN, [4] SCART 21-pin: S-VHS, some laptop computers, analog broadcast video, 1980-1990s home computers including the Commodore 64, C128 and Atari 8-bit computers: The 4-pin mini-DIN that is most common in consumer products today debuted in JVC's 1987 S-VHS. The 7-pin ...
D-subminiature 15-pin Composite. Often designated by the CVBS acronym, meaning "Color, Video, Blank and Sync". RCA jack, normally yellow (often accompanied with red and white for right and left audio channels respectively) S-Video (Separate Video). Carries standard definition video and does not carry audio on the same cable. Mini-DIN 4-pin ...
Photo: 2.5 mm mono (TS), 3.5 mm mono and stereo (TRS), and 1 ⁄ 4 inch (6.4 mm) stereo (TRS) phone connectors The most common microphone connector in consumer use is the venerable phone connector, in 1 ⁄ 4 inch (6.4 mm), 3.5 mm, and 2.5 mm sizes, and in both mono and stereo configurations.
4.1-9.5 connector, standardized as DIN 47231 (in 1974) and IEC 60169-11 (in 1977) 4.3-10 connector, formerly known as DIN 4.3/10, now standardized as IEC 61169-54; Belling-Lee connector, also called IEC 61169-2 connector, used throughout Europe and Australia, as well as parts of South-East Asia, for domestic television and FM radio antenna cabling
The de facto standard 8 inch FDD interface is based upon the Shugart Associates models SA800/801 [3] FDDs and models SA850/851 [4] FDDs. [5]: 171 The signal interface uses a 50-pin PCB edge connector which mates to a flat ribbon cable connector. Separate connectors are provided for both AC and DC power, as many 8 inch drives used AC spindle motors.
The male PCB connector on the 3½-inch floppy drive is normally a polarized right-angle male header, which is a TE Connectivity / AMP 171826-4, [4] the straight model is AMP 171825-4. [5] The shape of the connector housing makes it very easy to determine the pin number allocations by visual inspection.
The line in/out connections on consumer-oriented audio equipment are typically unbalanced, with a 3.5 mm (0.14 inch, but commonly called "eighth inch") 3-conductor TRS minijack connector providing ground, left channel, and right channel, or stereo RCA jacks.