Ads
related to: marine plywood 1 4 inch
Search results
Results From The WOW.Com Content Network
Plywood footlockers are a common type of footlocker used by the U.S. Army.They generally follow similar size and designs, undergoing only minor cosmetic changes in color and materials (from 1 ⁄ 2-inch-thick (13 mm) plywood to 1 + 1 ⁄ 4-inch-thick (32 mm) plywood, depending on war material needs and/or desire to reduce weight and cost of manufacture and cost of shipping).
In materials, BS 1088 is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue. [1]
[citation needed] At 3 ⁄ 8 inch (9.5 mm) thick, mahogany three-ply "wiggle board" or "bendy board" come in 4 by 8 feet (1.2 m × 2.4 m) sheets with a very thin cross-grain central ply and two thicker exterior plies, either long grain on the sheet, or cross grain. Wiggle board is often glued together in two layers once it is formed into the ...
The wooden Sailfish began as the 11-foot, 7 + 1 ⁄ 2-inch (3.5 m) "Standard" model. Shortly after its inception a larger, 13-foot, 7-inch (4.2 m) "Super" model was made available. In the early years the spars were made from Sitka spruce and the sail was silk. Historic photos show sails with as many as 10 panels and even small battens inserted ...
[57] ALTEC designed marine plywood cabinets that weighed half a ton apiece and stood 6 feet (1.8 m) tall, almost 4 feet (1.2 m) deep, and 3 feet (0.91 m) wide. Each of these enclosures carried four 15-inch (380 mm) JBL D140 loudspeakers. The tweeters consisted of 4×2-Cell & 2×10-Cell Altec Horns.
The Frosty is a racing sailboat, usually built of wood, using two 4 by 8 ft (1.2 by 2.4 m) sheets of 0.25 in (6.4 mm) plywood and assembled using an epoxy stitch and glue technique. [1] [2] The design has a pram hull with no chines or internal framing and has only one bulkhead.