Search results
Results From The WOW.Com Content Network
The differentials are interchangeable between the two variations. The new axle also came with disc brakes and a unique 8x170 mm (6.7 in) metric lug pattern. Options and features remained unchanged until model year 2011 trucks. 2011 models with this axle have the option of being equipped with an electronic locking differential. [1]
The Dana/Spicer Model 80 is an automotive axle manufactured by Dana Holding Corporation and has been used in OEM heavy duty applications by Chevrolet, Dodge, and Ford.It can be identified by its straight axle tubes, 10 bolt asymmetrical cover, and a "80" cast into the housing.
The drag pack required either the 3.91:1 or the 4.30:1 axle ratio, and included a 4-bolt main engine block, forged pistons, 780 CFM Holley carburetor, engine oil cooler, and a solid lifter cam. The "Detroit Locker" rear differential was included when the 4.30:1 axle was ordered while the "Traction-Lock" limited-slip differential was included ...
The maximum towing capacity was 24,500 lb (11,100 kg) (4.88:1 axle ratio) or 20,500 lb (9,300 kg) (4.30:1 axle ratio). The only configuration was the Crew Cab (until 2019 when a Regular Cab debuted for the F-450), with an 8-foot (2.4 m) long bed, DRW (Dual Rear Wheels), limited-slip rear axle, 10-lug 19.5-inch (500 mm) forged Alcoa wheels ...
The Dana 44 Front axle first saw use in the 1950s and still in use today. Dana 44 Front axles were known for utilizing locking hubs or a center axle disconnect system. However, a permanently locked-in Dana 44 is not uncommon. The Dana 44 has seen use in 1/4-, 1/2-, 3/4-, and 1-ton rated trucks.
All 5.7L Tundras came equipped with a tow package which included engine oil and transmission coolers, an integrated trailer hitch, 4.30:1 axle ratio, and large braking hardware for increased fade resistance. Equipped with the 5.7L V8, the Tundra had a maximum tow rating of 9,000–10,400 lb (4,100–4,700 kg) depending on body configuration.
Coil springs are located at each of the four wheels, and the suspension is independent in front, whereas the rear axle is a five-link live-type, with ratios between 3.90 and 4.30 depending on the model and market. Ground clearance is 235 mm (9.3 in), and go as far as 510 mm (20 in) deep in water.
This allowed for an 11.3:1 compression ratio, increasing output to 370 hp. The engine was fitted with or without a hood scoop, matched with a 3.25:1 rear-axle ratio. When fitted with a "shaker" hood scoop, a 429 CJ-Ram Air equipped vehicle received a 3.50:1 rear axle. In 1971, the CJ engine also used a four-bolt main block DOVE-A. Applications: