Search results
Results From The WOW.Com Content Network
The ASTM recognizes two grades of kerosene: 1-K (less than 0.04% sulfur by weight) and 2-K (0.3% sulfur by weight). [16] Grade 1-K kerosene burns cleaner with fewer deposits, fewer toxins, and less frequent maintenance than 2-K, and is the preferred grade for indoor heaters and stoves. [17] In the United Kingdom, two grades of heating oil are ...
The pressure at the top is maintained at 1.2–1.5 atm [2] so that the distillation can be carried out at close to atmospheric pressure, and therefore it is known as the atmospheric distillation column. [3] The vapors from the top of the column are a mixture of hydrocarbon gases and naphtha, at a temperature of 120 °C–130 °C.
Petroleum refinery in Anacortes, Washington, United States. Petroleum refining processes are the chemical engineering processes and other facilities used in petroleum refineries (also referred to as oil refineries) to transform crude oil into useful products such as liquefied petroleum gas (LPG), gasoline or petrol, kerosene, jet fuel, diesel oil and fuel oils.
This test method has better repeatability and reproducibility than manual method D97. Under ASTM D5949, the test sample is heated and then cooled by a Peltier device at a rate of 1.5±0.1 °C/min. At either 1 °C or 3 °C intervals, a pressurized pulse of compressed gas is imparted onto the surface of the sample.
For example, the viscosity of Venezuela's Orinoco extra-heavy crude oil lies in the range 1000–5000 cP (1–5 Pa·s), while Canadian extra-heavy crude has a viscosity in the range 5000–10,000 cP (5–10 Pa·s), about the same as molasses, and higher (up to 100,000 cP or 100 Pa·s for the most viscous commercially exploitable deposits). [2]
Military specifications of RP-1 are covered in MIL-R-25576, [5] and the chemical and physical properties of RP-1 are described in NISTIR 6646. [6] In Russia and other former Soviet countries, the two main rocket kerosene formulations are T-1 and RG-1. Densities are slightly higher, 0.82 to 0.85 g/mL, compared to RP-1 at 0.81 g/mL.
Number 1 fuel oil is a volatile distillate oil intended for vaporizing pot-type burners and high-performance/clean diesel engines. [8] It is the kerosene refinery cut that boils off immediately after the heavy naphtha cut used for gasoline. This fuel is commonly known as diesel no. 1, kerosene, and jet fuel. Former names include: coal oil ...
The world consumes 36 billion barrels (5.8 km 3) of oil per year, [1] with developed nations being the largest consumers. The United States consumed 18% of the oil produced in 2015. [2] The production, distribution, refining, and retailing of petroleum taken as a whole represents the world's largest industry in terms of dollar value.