Ads
related to: magnetic pulse forming system for cooling air compressor kit
Search results
Results From The WOW.Com Content Network
Electromagnetic forming (EM forming or magneforming) is a type of high-velocity, cold forming process for electrically conductive metals, most commonly copper and aluminium. The workpiece is reshaped by high-intensity pulsed magnetic fields that induce a current in the workpiece and a corresponding repulsive magnetic field, rapidly repelling ...
Figure 1: Schematic drawing of a Stirling-type single-orifice PTR. From left to right: a compressor, a heat exchanger (X 1), a regenerator, a heat exchanger (X 2), a tube (often called the pulse tube), a heat exchanger (X 3), a flow resistance (orifice), and a buffer volume. The cooling is generated at the low temperature T L. Room temperature ...
The magnetocaloric effect can be quantified with the following equation: = ((,)) ((,)) where is the adiabatic change in temperature of the magnetic system around temperature T, H is the applied external magnetic field, C is the heat capacity of the working magnet (refrigerant) and M is the magnetization of the refrigerant.
An explosively pumped flux compression generator (EPFCG) is a device used to generate a high-power electromagnetic pulse by compressing magnetic flux using high explosives. EPFCGs are physically destroyed during operation, making them single-use. They require a starting current pulse to operate, usually supplied by capacitors.
In a typical two-stage refrigerator, the first stage will offer higher cooling capacity but at higher temperature (≈ 77 K) with the second stage reaching ≈ 4.2 K and < 2.0 W of cooling power. In use, the first stage is used primarily for ancillary cooling of the cryostat with the second stage used primarily for cooling the magnet.
PCD-system operates in the following way: The crankshaft 4 starts moving in a circular motion by the external drive. During the motion of the piston 3 from the top dead center (TDC) to the bottom dead center (BDC) the intake valve 7 is opened, and the detonable gas mixture is pumped into the cylinder 2 of the compressor 1 through the intake port 6 using the supply system 8.
Ad
related to: magnetic pulse forming system for cooling air compressor kit