Search results
Results From The WOW.Com Content Network
It has a yield strength up to 80,000 psi (550 MPa) but costs only 24% more than A36 steel (36,000 psi (250 MPa)). One of the disadvantages of this steel is that it is 30 to 40% less ductile . In the U.S., these steels are dictated by the ASTM standards A1008/A1008M and A1011/A1011M for sheet metal and A656/A656M for plates.
The centipoise is convenient because the viscosity of water at 20 °C is about 1 cP, and one centipoise is equal to the SI millipascal second (mPa·s). The SI unit of kinematic viscosity is square meter per second (m 2 /s), whereas the CGS unit for kinematic viscosity is the stokes (St, or cm 2 ·s −1 = 0.0001 m 2 ·s −1 ), named after Sir ...
Wrought iron is an iron alloy with a very low carbon content (less than 0.05%) in contrast to that of cast iron (2.1% to 4.5%). It is a semi-fused mass of iron with fibrous slag inclusions (up to 2% by weight), which give it a wood-like "grain" that is visible when it is etched, rusted, or bent to failure.
The torr (symbol: Torr) is a unit of pressure based on an absolute scale, defined as exactly 1 / 760 of a standard atmosphere (101325 Pa). Thus one torr is exactly 101325 / 760 pascals (≈ 133.32 Pa).
ASTM A706 Gr. 60 is an example of a controlled property range material specification which has a minimum yield strength of 60 ksi (420 MPa), maximum yield strength of 78 ksi (540 MPa), minimum tensile strength of 80 ksi (550 MPa) and not less than 1.25 times the actual yield strength, and minimum elongation requirements that vary by bar size.
As the pressure is increased, the compressibility decreases, being 3.9 × 10 −10 Pa −1 at 0 °C and 100 megapascals (1,000 bar). [42] The bulk modulus of water is about 2.2 GPa. [43] The low compressibility of non-gasses, and of water in particular, leads to their often being assumed as incompressible.
Disodium helide (Na 2 He) is a compound of helium and sodium that is stable at high pressures above 113 gigapascals (1,130,000 bar). Disodium helide was first predicted [5] using USPEX code and was first synthesised in 2016.
Aluminium–copper alloys (AlCu) are aluminium alloys that consist largely of aluminium (Al) and traces of copper (Cu) as the main alloying elements.Important grades also contain additives of magnesium, iron, nickel and silicon (AlCu(Mg, Fe, Ni, Si)), often manganese is also included to increase strength (see aluminium-manganese alloys).