Search results
Results From The WOW.Com Content Network
An alternative to the pilot light is a system to create a high voltage electrical arc or spark between two electrodes, in order to light the gas flowing to the burner. Fail-safe design for such a system requires the burner flame to be detected by passing an electric current through the flame, which is received by the flame rectification circuit ...
Flame lift-off in oil fired pressure jet burners is an unwanted condition in which the flame and burner become separated. This condition is most commonly created by excessive combustion air and often results in the loss of flame as the photoelectric cell fails to register the light of the flame, this in turn results in a safety lockout of the control box.
The oxy-acetylene (and other oxy-fuel gas mixtures) welding torch remains a mainstay heat source for manual brazing, as well as metal forming, preparation, and localized heat treating. In addition, oxy-fuel cutting is still widely used, both in heavy industry and light industrial and repair operations.
The Chambers Fireless Gas Range was a gas cook stove created by John E. Chambers in 1910, [1] [2] Two years after inventing his fireless cooker, John Chambers organized the Chambers Company in 1912. [1] Chambers' patented method of manufacture [3] used thick rock wool insulation to insulate the oven on all sides. This made it possible for the ...
Propane burner with a Bunsen flame Oxy-Acetylene for cutting through steel rails Flame of a gas and oil, in a dual burner. A gas burner is a device that produces a non-controlled flame by mixing a fuel gas such as acetylene, natural gas, or propane with an oxidizer such as the ambient air or supplied oxygen, and allowing for ignition and ...
Hot gas mantles. The lowest visible mantle has partially broken, reducing its light output An 85 mm Chance Brothers Incandescent Petroleum Vapour Installation. The mantle is a roughly pear-shaped fabric bag, made from silk, ramie-based artificial silk, or rayon. The fibers are impregnated with metallic salts; when the mantle is first heated in ...
Flames of charcoal. A flame (from Latin flamma) is the visible, gaseous part of a fire.It is caused by a highly exothermic chemical reaction made in a thin zone. [1] When flames are hot enough to have ionized gaseous components of sufficient density, they are then considered plasma.
Gas mark 1 is 275 degrees Fahrenheit (135 degrees Celsius). [citation needed] Oven temperatures increase by 25 °F (14 °C) for each gas mark step. Above Gas Mark 1, the scale markings increase by one for each step. Below Gas Mark 1, the scale markings halve at each step, each representing a decrease of 25 °F (14 °C).