Ads
related to: adjustment knob for microscope description
Search results
Results From The WOW.Com Content Network
Adjustment knobs move the stage up and down with separate adjustment for coarse and fine focusing. The same controls enable the microscope to adjust to specimens of different thickness. In older designs of microscopes, the focus adjustment wheels move the microscope tube up or down relative to the stand and had a fixed stage. [citation needed]
Zero adjustment knob - This is used to manually adjust the triple beam balance to the 'zero' mark (check to ensure that the pointer is at zero before use). Before using triple beam balance, the scale pointer should be at zero. The zero adjustment knob can be used to adjust the scale pointer.
The zero adjustment knob can be used to adjust the scale pointer. Place the objects on the pan and adjust the riders until the scale pointer is at zero again, and then sum the weights marked (e.g. the 4th notch of 100 gram beam is 400g) to find the weight of the sample.
A traveling microscope. E—eyepiece, O—objective, K—knob for focusing, V—vernier, R—rails, S—screw for fine position adjustment. A travelling microscope is an instrument for measuring length with a resolution typically in the order of 0.01mm.
The focus of the first lens is traditionally about 2mm away from the plane face coinciding with the sample plane. A pinhole cap can be used to align the optical axis of the condenser with that of the microscope. The Abbe condenser is still the basis for most modern light microscope condenser designs, even though its optical performance is poor.
Two control knobs for a heating/cooling system. The left knob controls the temperature while the right controls the fan speed. A control knob is a rotary device used to provide manual input adjustments to a mechanical/electrical system when grasped and turned by a human operator, so that differing extent of knob rotation corresponds to different desired input.
Ad
related to: adjustment knob for microscope description