Search results
Results From The WOW.Com Content Network
The beam pattern of a transducer can be determined by the active transducer area and shape, the ultrasound wavelength, and the sound velocity of the propagation medium. The diagrams show the sound fields of an unfocused and a focusing ultrasonic transducer in water, plainly at differing energy levels.
Schematic view of a flow sensor. An ultrasonic flow meter is a type of flow meter that measures the velocity of a fluid with ultrasound to calculate volume flow. Using ultrasonic transducers, the flow meter can measure the average velocity along the path of an emitted beam of ultrasound, by averaging the difference in measured transit time between the pulses of ultrasound propagating into and ...
The PA probe consists of many small ultrasonic transducers, each of which can be pulsed independently.By varying the timing, for instance by making the pulse from each transducer progressively delayed going up the line, a pattern of constructive interference is set up that results in radiating a quasi-plane ultrasonic beam at a set angle depending on the progressive time delay.
Piezoelectric micromachined ultrasonic transducers (PMUT) are MEMS-based piezoelectric ultrasonic transducers.Unlike bulk piezoelectric transducers which use the thickness-mode motion of a plate of piezoelectric ceramic such as PZT or single-crystal PMN-PT, PMUT are based on the flexural motion of a thin membrane coupled with a thin piezoelectric film, such as PVDF.
Main page; Contents; Current events; Random article; About Wikipedia; Contact us; Donate; Pages for logged out editors learn more
Using piezoelectric transducer, the wave propagation angle in the test part is affected by Snell's law. As a result, a small variation in sensor deployment may cause a significant change in the refracted angle. Easier to generate SH-type waves. Using piezoelectric transducers, SH wave is difficult to couple to the test part.
In ultrasonic testing, an ultrasound transducer connected to a diagnostic machine is passed over the object being inspected. The transducer is typically separated from the test object by a couplant [ 4 ] such as a gel, oil or water, [ 1 ] as in immersion testing.
A standard frequency used by an ultrasonic thickness gauge is 5 MHz. Some ultrasonic coating thickness gauges require that a couplant in gel, paste or liquid format be used to eliminate gaps between the transducer and the test piece. One common couplant is propylene glycol, but there are many other options which can be substituted.