Search results
Results From The WOW.Com Content Network
Vernier caliper scales; main at top, vernier at bottom. It reads 3.58 ± 0.02 mm by adding 3.00 mm (left red mark) on the fixed main scale to vernier 0.58 mm (right red mark). The main scale reading is that to the left of the zero on the vernier scale. The vernier reading is found by locating the best aligned lines between the two scales.
The main scale reading is the rightmost graduation that is to the left of the zero on the vernier scale. The vernier reading is found by locating the best aligned lines between the two scales. The 0.02 mm engraving indicates the caliper's accuracy and is the "Vernier constant" for this scale. He was born in Ornans, France, in 1580. He was ...
The rod may be equipped with a target to increase the readable range of the rod. When the target is equipped with a Vernier scale measurements to the thousandths of a foot are possible. For readings less than 7 ft the target is attached on the bottom section of the rod and adjust by signals from level operator until the target is inline with ...
The calipers in the diagram show a primary reading on the metric scale of about 2.475 cm (2.4 cm read from the main scale plus about 0.075 cm from the vernier scale). Calipers often have a "zero point error": meaning that the calipers do not read 0.000 cm when the jaws are closed.
Vernier acuity (from the term "vernier scale", named after astronomer Pierre Vernier) is a type of visual acuity – more precisely of hyperacuity – that measures the ability to discern a disalignment among two line segments or gratings. A subject's vernier (IPA: / ˈ v ɜːr n ɪər /) acuity is the smallest visible offset between the ...
Since the spaces, both on the main scale and the Vernier scale, are numbered both to the right and the left from zero, any angle can be measured. The readings can be taken either to the right or to the left, according to the direction in which the zero on the main scale is moved.
On a standard scale of 90 degrees, there are an additional 44–45 concentric circles, with each divided into a specific unit size such that a scale unit on position had an arc of / degrees. [ 2 ] [ 3 ] Thus, the outermost quadrant would comprise 90° in 90 equal divisions, the next inner would have 89 divisions, the next 88 and so on.
Vernier micrometer reading 5.783 ± 0.001 mm, comprising 5.5 mm on main screw lead scale, 0.28 mm on screw rotation scale, and 0.003 mm added from vernier. Some micrometers are provided with a vernier scale on the sleeve in addition to the regular graduations. These permit measurements within 0.001 millimetre to be made on metric micrometers ...