Search results
Results From The WOW.Com Content Network
Device configuration overlay (DCO) is a hidden area on many of today's hard disk drives (HDDs). Usually when information is stored in either the DCO or host protected area (HPA), it is not accessible by the BIOS (or UEFI), OS, or the user. However, certain tools can be used to modify the HPA or DCO.
Some vendor-specific external drive enclosures (e.g. Maxtor, owned by Seagate since 2006) are known to use HPA to limit the capacity of unknown replacement hard drives installed into the enclosure. When this occurs, the drive may appear to be limited in size (e.g. 128 GB), which can look like a BIOS or dynamic drive overlay (DDO) problem.
An external hard drive enclosure that uses a 2.5-in drive and a USB connection for power and transfer. Key benefits to using external disk enclosures include: Adding additional storage space and media types to small form factor and laptop computers, as well as sealed embedded systems such as digital video recorders [1] and video game consoles. [2]
That SFF standard described a communication protocol for an ATA host to use and control monitoring and analysis in a hard disk drive, but did not specify any particular metrics or analysis methods. Later, "S.M.A.R.T." came to be understood (though without any formal specification) to refer to a variety of specific metrics and methods and to ...
A hard disk drive failure occurs when a hard disk drive malfunctions and the stored information cannot be accessed with a properly configured computer. A hard disk failure may occur in the course of normal operation, or due to an external factor such as exposure to fire or water or high magnetic fields , or suffering a sharp impact or ...
[19] [failed verification] The capacity of a hard disk drive, as reported by an operating system to the end user, is smaller than the amount stated by the manufacturer for several reasons, e.g. the operating system using some space, use of some space for data redundancy, space use for file system structures.
LBA = (C × HPC + H) × SPT + (S − 1) where C, H and S are the cylinder number, the head number, and the sector number; LBA is the logical block address; HPC is the maximum number of heads per cylinder (reported by disk drive, typically 16 for 28-bit LBA) SPT is the maximum number of sectors per track (reported by disk drive, typically 63 for ...
The SCSI ID of a device in a drive enclosure that has a back plane is set either by jumpers or by the slot in the enclosure the device is installed into, depending on the model of the enclosure. In the latter case, each slot on the enclosure's back plane delivers control signals to the drive to select a unique SCSI ID.