Search results
Results From The WOW.Com Content Network
A direct-shift gearbox (DSG, German: Direktschaltgetriebe [1]) [2] [3] is an electronically controlled, dual-clutch, [2] multiple-shaft, automatic gearbox, in either a transaxle or traditional transmission layout (depending on engine/drive configuration), with automated clutch operation, and with fully-automatic [2] or semi-manual gear selection.
[43] [44] [45] Another early example of this transmission system was introduced in the 1955 Citroën DS, which used a 4-speed BVH transmission. This semi-automatic transmission used an automated clutch, which was actuated using hydraulics. Gear selection also used hydraulics, however, the gear ratio needs to be manually selected by the driver.
An automated manual transmission may include a fully automatic mode where the driver does not need to change gears at all. [24] These transmissions can be described as a standard manual transmission with an automated clutch and automated gear shift control, allowing them to operate in the same manner as traditional automatic transmissions.
Automated manual transmissions can be semi-automatic or fully-automatic in operation. Several different systems to automate the clutch and/or shifting have been used over the years, but they will generally use one of the following methods of actuation for the clutch and/or shifting: hydraulic or electro-hydraulic actuation, [12] electro-mechanical, [13] pneumatic, [6] [14] [15] electromagnetic ...
The automatic lubrication system is connected to a control system via switchs. The control system may involve human input or may be computerised (computer numerical control or CNC). [2] [3] There are advantages of using an automatic lubrication system over a manual system. For example, there are savings in the costs of human resources. The ...
A transmission control unit (TCU), also known as a transmission control module (TCM), or a gearbox control unit (GCU), is a type of automotive ECU that is used to control electronic automatic transmissions. Similar systems are used in conjunction with various semi-automatic transmissions, purely for clutch automation and actuation.
Many transmissions – especially for transportation applications – have multiple gears that are used to change the ratio of input speed (e.g. engine rpm) to the output speed (e.g. the speed of a car) as required for a given situation. Gear (ratio) selection can be manual, semi-automatic, or automatic.
The police package (9C1) B-body cars featured a First Gear Block Out (FGBO) Plate on the transmission housing to prevent drivetrain damage. The shift point for first to second gear is about 43 MPH (69 km/h) while second to third gear shift point is about 83 MPH (134 km/h) assuming a 3.08:1 differential and a 5,500 RPM engine speed limit.