Ads
related to: do i need displayport 2.1 to 3.0 hdmi
Search results
Results From The WOW.Com Content Network
USB-C connectors can transmit DisplayPort video to docks and displays using standard USB type-C cables or type-C to DisplayPort cables and adapters; USB-C also supports HDMI adapters that actively convert from DisplayPort to HDMI 1.4 or 2.0. DisplayPort Alternate Mode for USB type-C specification was published in 2015. USB type-C chipsets are ...
E-DDC Version 1.1, approved March 2004, featured support for HDMI and consumer electronics. E-DDC Version 1.2, approved December 2007, introduced support for DisplayPort (which has no dedicated DDC2B links and uses its bidirectional auxiliary channel for EDID and MCCS communication) and DisplayID standards.
While Microsoft Windows environments have full support for it, Apple operating systems currently do not support MST hubs or DisplayPort daisy-chaining as of macOS 10.15 ("Catalina"). [58] [59] DisplayPort-to-DVI and DisplayPort-to-HDMI adapters/cables may or may not function from an MST output port; support for this depends on the specific device.
HDMI Type A socket. High-Definition Multimedia Interface (HDMI) is a compact audio/video standard for transmitting uncompressed digital data. There are three HDMI connector types. Type A and Type B were defined by the HDMI 1.0 specification. Type C was defined by the HDMI 1.3 specification.
SlimPort is a proprietary alternative to MHL, based on the DisplayPort standard integrated into common Micro-USB ports, and supports up to 1080p60 or 1080p30 with 3D content over HDMI 1.4 (up to 5.4 Gbit/s of bandwidth), in addition to support for DVI, VGA (up to 1920 × 1080 at 60 Hz), and DisplayPort.
Supports DVI, HDMI 1.2: 13 June 2006: Supports DVI, HDMI 1.3: 21 Dec 2006: Supports DVI, HDMI, DP, GVIF, UDI: 1.4: 8 July 2009: 2.0 IIA: 23 Oct 2008: Interface Independent Adaptation, any IP-based interface; Compressed or uncompressed video (only specified for compressed over PES though) 2.1 IIA: 18 July 2011: New mechanism to manage Type 1 ...
The data is transmitted via the cable connecting the display and the graphics card; VGA, DVI, DisplayPort and HDMI are supported. [ citation needed ] The EDID is often stored in the monitor in the firmware chip called serial EEPROM (electrically erasable programmable read-only memory) and is accessible via the I²C-bus at address 0x50 .
DisplayPort 2.0 can support higher than 8K resolution at 60 Hz losslessly due to new UHBR 10, 13.5, and 20 signaling standards (DSC 1.2 used in DisplayPort 1.4 for that resolution is not lossless) in 8 bit and 8K 60 Hz with 10 bit color and use up to 80 Gbit/s (effective bandwidth 77.37 Gbit/s), which is double the amount available to USB data ...