Ads
related to: aftermarket heads for 5.3 liter horsepower engine swap meet on facebook
Search results
Results From The WOW.Com Content Network
The Oldsmobile engine block formed the basis of the Repco 3-liter engine used by Brabham to win the 1966 and 1967 Formula One world championships. The early Repco engines produced up to 300 bhp (220 kW), and featured new SOHC cylinder heads and iron cylinder liners. The 1967 and later versions of the Repco engine had proprietary engine blocks.
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
Today the flat-head Ford is mainly used in "retro" hot-rod builds by builders more interested in an historic feel and recreating history than performance. Even four-cylinder Ford engines are used to make a retro hot-rod "correct". Ford flathead V-8 with an aftermarket twin plug cylinder head & Stromberg carburettors
The "garden variety" Generation III V8 has a cast-iron block and aluminum heads. The 1999 LM7 engine produced 270 hp (201 kW) and 315 lb⋅ft (427 N⋅m) of torque. The 2000–2003 engines produced 285 hp (213 kW) and 325 lb⋅ft (441 N⋅m) of torque. The 2004–2007 engines produced 295 hp (220 kW) and 335 lb⋅ft (454 N⋅m) of torque.
The valve size increased as well, to 2.11 in (53.6 mm) intake and 1.77 in (45.0 mm) exhaust valves on high-performance heads. Low-performance and two-barrel applications, the standard engine in full-sized Pontiacs, got 1.96 in (49.8 mm) intake and 1.66 in (42.2 mm) exhaust valves and pressed in rocker arm studs.
Cylinder head material: ... The Duramax V8 engine is a family of 6.6-liter diesel V8 engines ... it was the most powerful diesel engine GM had produced, with 445 hp ...
The 5.8 is formally known as the Trinity Engine or 5.8-liter V8 engine, which benefits from cylinder heads with improved coolant flow, Ford GT camshafts, piston-cooling oil jets similar to those found on the 5.0 Coyote, new 5-layer MLS head gaskets, an over-rev function that increases the red line to 7000 rpm for up to 8 seconds (from 6250 rpm ...
The 1970 model year Camaro had a 250 hp (186 kW) high-performance two-barrel Rochester carburetor. In 1971, it dropped to 245 hp (183 kW), and net performance further dropped to 165 hp (123 kW) for 1972 and 145 hp (108 kW) for 1973–1976. It was basically the two-barrel version of the L48 350. It was produced until the 1976 model year.