Search results
Results From The WOW.Com Content Network
the design drain spacing (L) can be found from the equation in dependence of the drain depth (Dd) and drain radius (r). Drainage criteria One would not want the water table to be too shallow to avoid crop yield depression nor too deep to avoid drought conditions. This is a subject of drainage research.
Drainage gradient (DG) is a term in road design, defined as the combined slope due to road surface cross slope (CS) and longitudinal slope (hilliness). Although the term may not be used, the concept is also used in roof design and landscape architecture. If the drainage gradient is too low, rain and melt water drainage will be insufficient.
Before installing a check dam, engineers inspect the site. Standard practices call for the drainage area to be ten acres or less. [3] [9] The waterway should be on a slope of no more than 50% and should have a minimum depth to bedrock of 2 ft (0.61 m). [14] Check dams are often used in natural or constructed channels or swales.
The slope of the water table is known as the “hydraulic gradient”, which depends on the rate at which water is added to and removed from the aquifer and the permeability of the material. The water table does not always mimic the topography due to variations in the underlying geological structure (e.g., folded, faulted, fractured bedrock).
Drainage density is a quantity used to describe physical parameters of a drainage basin. First described by Robert E. Horton , drainage density is defined as the total length of channel in a drainage basin divided by the total area, represented by the following equation:
It uses a combination of the energy, momentum, and continuity equations to determine water depth with a given a friction slope (), channel slope (), channel geometry, and also a given flow rate. In practice, this technique is widely used through the computer program HEC-RAS , developed by the US Army Corps of Engineers Hydrologic Engineering ...
In geotechnical engineering, watertable control is the practice of controlling the height of the water table by drainage.Its main applications are in agricultural land (to improve the crop yield using agricultural drainage systems) and in cities to manage the extensive underground infrastructure that includes the foundations of large buildings, underground transit systems, and extensive ...
In horizontal curves, the cross slope is banked into superelevation to reduce steering effort and lateral force required to go around the curve. [1] All water drains to the inside of the curve. [ 2 ] If the cross slope magnitude oscillates within 1–25 metres (3–82 ft), the body and payload of high (heavy) vehicles will experience high roll ...