Ads
related to: drip irrigation valve installation
Search results
Results From The WOW.Com Content Network
Drip irrigation systems distribute water through a network of valves, pipes, tubing, and emitters. Depending on how well designed, installed, maintained, and operated it is, a drip irrigation system can be more efficient than other types of irrigation systems, such as surface irrigation or sprinkler irrigation.
Illustration of a pulse drip irrigation system. Magnets hold the valve closed while water comes in through the inlet and drip flow controller to charge the reservoir. When the building pressure finally overcomes the attractive force of the magnets the top set of magnets are forced upward to open the valve.
Most automatic irrigation valves are diaphragm valves in which the water above the diaphragm must be discharged for the valve to open. In a hydraulic system, the controller and valves are connected via small plastic tubes approximately 4 mm (¼ in) in diameter. The controller opens the tube connected to the valve, allowing that valve to open.
Micro-irrigation, sometimes called localized irrigation, low volume irrigation, or trickle irrigation is a system where water is distributed under low pressure through a piped network, in a pre-determined pattern, and applied as a small discharge to each plant or adjacent to it. Traditional drip irrigation use individual emitters, subsurface ...
The loss of strength from using thin-walled drip tapes was countered by the additional tensile strength of the entire system (base layer, drip tape and geotextile). While significantly reducing the cost of SSTI, the use of drip tapes also permitted the use of large diameter drip lines (of up to 35mm) allowing for run lengths up to one (1 ...
Micro-irrigation, also called Micro-spray,localized, low-volume, low-flow, or trickle irrigation, is an irrigation method with lower water pressure and flow than a traditional sprinkler system. Low-volume irrigation is used in agriculture for row crops , orchards , and vineyards .