Search results
Results From The WOW.Com Content Network
The firing order has been changed from that shared by all previous Modular V8s (1-3-7-2-6-5-4-8) to that of the Ford Flathead V8 (1-5-4-8-6-3-7-2). [17] Compression ratio is 11.0:1, and despite having port fuel injection (as opposed to direct injection) the engine can still be run on 87 octane gasoline.
The 351W had larger main bearing caps, thicker and longer connecting rods, and a distinct firing order (1-3-7-2-6-5-4-8 versus the usual 1-5-4-2-6-3-7-8, a means to move the unacceptable "noise" of the consecutively-firing adjacent front cylinders to the sturdier rear part of the engine block all while reducing excessive main bearing load ...
The 410 engine, used in 1966 and 1967 Mercurys (see Ford MEL engine regarding 1958 senior series Edsels), used the same 4.05 in (102.87 mm) bore as the 390 engine, but with the 428's 3.98 in (101.09 mm) stroke, giving a 410.1 cu in (6.7 L) real displacement. The standard 428 crankshaft was used, which meant that the 410, like the 428, used ...
For this inline-4 engine, 1-3-4-2 could be a valid firing order. The firing order of an internal combustion engine is the sequence of ignition for the cylinders. In a spark ignition (e.g. gasoline/petrol) engine, the firing order corresponds to the order in which the spark plugs are operated. In a diesel engine, the firing order corresponds to ...
1986–1987 Ford-Cosworth GBA engine—120° V6, 1.5 L (Formula One engine) 1986–2007 Vulcan V6 —60° pushrod V6 3.0 L, originally designed for the Taurus 1989–1995 SHO V6 3.0/3.2 L DOHC V6
The Barra V8 (not to be confused with the Australian-made Barra I6), manufactured at the Essex, Ontario, Canada engine plant, was based on the Ford modular engine. All were 90-degree V8 engines with a displacement of 5.4 litres. All are SOHC with VCT incorporating 3 valves per cylinder. The Falcon was the first vehicle to use Ford's VCT Modular ...
The Ford 335 engine was a family of engines built by the Ford Motor Company between 1969 and 1982. The "335" designation reflected Ford management's decision during its development to produce a 335 cu in (5.5 L) engine with room for expansion. [ 1 ]
Named for the 1962 Ford Taunus V4 engine and Ford Cologne V6 engine built in Cologne, Germany.. 1.2/1.3/1.5/1.7L were mostly in European Cars. 1.8, 2.0/2.3 had the same bellhousings bolt patterns with differences from year to year to be wary of.