Ad
related to: where to install check valve on water pump on honda vtec
Search results
Results From The WOW.Com Content Network
Variable Cylinder Management (VCM) is Honda's term for its variable displacement technology, which saves fuel by using the i-VTEC system to disable one bank of cylinders during specific driving conditions—for example, highway driving. The second version of VCM (VCM-2) took this a step further, allowing the engine to go from 6 cylinders, down ...
In 1989, Honda released the VTEC system. [13] While the earlier Nissan NVCS alters the phasing of the camshaft, VTEC switches to a separate cam profile at high engine speeds to improve peak power. The first VTEC engine Honda produced was the B16A which was installed in the Integra, CRX, and Civic hatchback available in Japan and Europe ...
A Honda K24A Engine with i-VTEC. VTEC (described as Variable Valve Timing & Lift Electronic Control, but stands for Valve Timing Electronically Controlled) is a system developed by Honda to improve the volumetric efficiency of a four-stroke internal combustion engine, resulting in higher performance at high RPM, and lower fuel consumption at low RPM.
It is fuel injected, has an aluminum-alloy cylinder block and cylinder head, is a SOHC 16-valve design (four valves per cylinder) and utilizes Honda's i-VTEC system. The R series engine has a compression ratio of 10.5:1, features a " drive by wire " throttle system which is computer controlled to reduce pumping losses and create a smooth torque ...
2.4 DOHC i-VTEC. i-VTEC is the acronym for intelligent VTEC (Variable Valve Timing and Lift Electronic Control), an evolution of Honda's VTEC engine. The i-VTEC engine works by controlling the timing and lifting of the camshafts depending on engine speeds. The valves open a small amount during low engine speeds to achieve optimal fuel ...
The J-series engine was designed in the United States by Honda engineers. It is built at Honda's Anna, Ohio, and Lincoln, Alabama, engine plants. The J-series is a 60° V6 unlike Honda's existing 90° C-series engines. Also unlike the C series, the J-series was specifically and only designed for transverse mounting.
Honda K24A4 2.4L DOHC i-VTEC Engine installed in 2003 Honda Accord. The Honda K-series engine is a line of four-cylinder four-stroke car engines introduced in 2001. The K-series engines are equipped with DOHC valvetrains and use roller rockers on the cylinder head to reduce friction.
The engine was the second Honda engine ever to utilize Honda's proprietary VTEC variable valve timing system in an automotive application after the B16A, which adjusts cam lift depending on engine RPM and throttle position. VTEC allows the C30A to produce a high maximum power level while maintaining a relatively flat torque curve.