Search results
Results From The WOW.Com Content Network
Shear (and tension) loads can be transferred between two structural elements by either a bearing-type connection or a slip-critical connection. In a slip-critical connection, loads are transferred from one element to another through friction forces developed between the faying surfaces of the connection. These friction forces are generated by ...
The fixed end moments are reaction moments developed in a beam member under certain load conditions with both ends fixed. A beam with both ends fixed is statically indeterminate to the 3rd degree, and any structural analysis method applicable on statically indeterminate beams can be used to calculate the fixed end moments.
Bolt banging occurs in buildings when bolted joints slip into "bearing under load", thus causing a loud and potentially frightening noise resembling a rifle shot that is not, however, of structural significance and does not pose any threat to occupants. A bolted joint between two elements may act as a bearing-type joint, or a friction joint.
Attempts have been made to increase the safety of bridges with pin and hanger assemblies by adding some form of redundancy to the assembly. Retrofits that add redundancy to pin and hanger assemblies include adding a "catcher's mitt"—a short steel beam attached to the bottom of the cantilevered girder that extends out beneath the suspended girder to "catch" the suspended girder should ...
A plain scarf joint A nibbed scarf joint A keyed, nibbed scarf, reinforced with fish plates and through bolts The scarf joint used on the beams above the post is known by its French name, trait de jupiter, or bolt-o-lightning joint. A scarf joint, or scarph joint, is a method of joining two members end to end in woodworking or metalworking. [1]
BDS C (or the BD Software C Compiler) is a compiler for a sizeable subset of the C programming language, that ran on and generated code for the Intel 8080 and Zilog Z80 processors. It was the first C compiler for CP/M. [1] It was written by Leor Zolman [2] and first released in 1979 when he was 20 years old. "BDS" stands for "Brain Damage ...
Strength depends upon material properties. The strength of a material depends on its capacity to withstand axial stress, shear stress, bending, and torsion.The strength of a material is measured in force per unit area (newtons per square millimetre or N/mm², or the equivalent megapascals or MPa in the SI system and often pounds per square inch psi in the United States Customary Units system).
It has been supplanted in modern construction with welded or bolted plate girders, which use more material but have lower fabrication and maintenance costs. The term is also sometimes used to refer to a laced strut [ 2 ] or laced tie , structural members commonly made using a combination of structural sections connected with diagonal lacing.