Search results
Results From The WOW.Com Content Network
Copper alloys are metal alloys that have copper as their principal component. They have high resistance against corrosion . Of the large number of different types, the best known traditional types are bronze , where tin is a significant addition, and brass , using zinc instead.
APG is an anisotropic material with extremely high in-plane thermal conductivity (1,700 W/m-K at room temperature [2]) and low through-thickness conductivity. Its laminate structure remains stable across a wide temperature range allowing it to be used in a variety of heat transfer applications. APG's conductivity generally increases as the ...
The method of producing OFHC copper ensures an extra high grade of metal with a copper content of 99.99%. With so small a content of extraneous elements, the inherent properties of elemental copper are brought forth to a high degree. In practice the oxygen content is typically 0.001 to 0.003% with a total maximum impurity level of 0.03%.
Cryogenic processing (and especially cryogenic tempering) can have a profound effect on the mechanical properties of certain materials, such as steels or tungsten carbide, but the heating phase in cryogenic tempering is typically omitted for softer metals like brass in musical instruments, for piano strings, in certain aerospace applications ...
International Annealed Copper Standard (IACS) pure =1.7×10 −8 Ω•m =58.82×10 6 Ω −1 •m −1. For main article, see: Copper in heat exchangers. The TPRC recommended values are for well annealed 99.999% pure copper with residual electrical resistivity of ρ 0 =0.000851 μΩ⋅cm. TPRC Data Series volume 1 page 81. [8]
A material property is an intensive property of a material, i.e., a physical property or chemical property that does not depend on the amount of the material. These quantitative properties may be used as a metric by which the benefits of one material versus another can be compared, thereby aiding in materials selection.
Manganin is a trademarked name for an alloy of typically 84.2% copper, 12.1% manganese, and 3.7% nickel. It was first developed by Edward Weston in 1892, improving upon his Constantan (1887). Manganin foil and wire is used in the manufacture of resistors , particularly ammeter shunts , because of its virtually zero temperature coefficient of ...
The electrical conductivity of 6-nines copper and 4-nines copper (99.99% pure) is nearly the same at ambient temperature, although the higher-purity copper has a higher conductivity at cryogenic temperatures. Therefore, for non-cryogenic temperatures, 4-nines copper will probably remain the dominant material for most commercial wire ...