Ad
related to: gas fireplace main burner not turning on or charging when plugged in windows 10
Search results
Results From The WOW.Com Content Network
When the fireplace is turned on, gas flows to the main burner, which is ignited by the pilot light. This is what produces a larger flame in the fireplace. Even when the fireplace is off, the pilot ...
Auto reignition lowers the risk of gas leaks: if a flame goes out during operation, for example, from vibration or a gust of wind; due to misoperation—a user might not understand the "light" position must be maintained for about 0.5 to 2 seconds before turning the burner knob on fully.
To begin the operation of the fireplace unit, the user must turn on the gas supply and ignite the burners. Once this is done, the unit will operate completely autonomously until the gas supply to the burners is shut off. While in operation, convection will cause the hot air in the firebox to rise to the top of the firebox. As the amount of hot ...
An alternative to the pilot light is a system to create a high voltage electrical arc or spark between two electrodes, in order to light the gas flowing to the burner. Fail-safe design for such a system requires the burner flame to be detected by passing an electric current through the flame, which is received by the flame rectification circuit ...
Gas stoves today use two basic types of ignition sources, standing pilot and electric. [21] A stove with a standing pilot has a small, continuously burning gas flame (called a pilot light) under the cooktop. [21] The flame is between the front and back burners. When the stove is turned on, this flame lights the gas flowing out of the burners.
Modern open fireplace An outdoor fireplace. A fireplace or hearth is a structure made of brick, stone or metal designed to contain a fire. Fireplaces are used for the relaxing ambiance they create and for heating a room. Modern fireplaces vary in heat efficiency, depending on the design.
Propane burner with a Bunsen flame Oxy-Acetylene for cutting through steel rails Flame of a gas and oil, in a dual burner. A gas burner is a device that produces a non-controlled flame by mixing a fuel gas such as acetylene, natural gas, or propane with an oxidizer such as the ambient air or supplied oxygen, and allowing for ignition and ...
Only the pressure of the fuel gas is used to draw in and mix the air. They are the most simple and common type of mixing device for gas stoves and furnaces. Burners using an inspirator are considered to be naturally aspirated. In an inspirator there are two tubes. The first is a fuel gas pipe with an orifice at the end where the gas comes out ...