Ads
related to: sd vu level ammeter voltmeter
Search results
Results From The WOW.Com Content Network
An analog VU meter with peak LED. A volume unit (VU) meter or standard volume indicator (SVI) is a device displaying a representation of the signal level in audio equipment.. The original design was proposed in the 1940 IRE paper, A New Standard Volume Indicator and Reference Level, written by experts from CBS, NBC, and Bell Telephone Laboratories. [1]
Ammeter (Ampermeter) Measures current Capacitance meter: Measures the capacitance component Current clamp: Measures current without physical connection Curve tracer: Applies swept signals to a device and allows display of the response Cos Phi Meter: Measures the power factor Distortionmeter: Measures the distortion added to a circuit ...
In analogue systems, alignment level in broadcast chains is commonly 0 dBu (0.775 volts RMS) and in professional audio is commonly 0 VU (4 dBu, 1.228 volts RMS). Under normal situations, the 0 VU reference allows for a headroom of 18 dB or more above the reference level without significant distortion.
Thus, the meter might not ever accurately reflect the signal at every instant of time, but the constantly changing level, combined with the slower response time, led to more of an average indication. By comparison, a peak meter is designed to respond so quickly that the meter display reacts in exact proportion to the voltage of the audio signal.
Broadcast engineers in North America usually line up their audio gear to nominal reference level of 0 dB on a VU meter aligned to +4 dBu or -20 dBFS, in Europe equating to roughly +4 dBm or -18 dBFS. Peak signal levels must not exceed the nominal level by more than +10 dB. [10]
The ammeter is used in series with the load, so the same current flows through the load and the ammeter. The voltmeter is used in parallel with the load, so the voltage between the two terminals of the load is equal to the voltage between the two terminals of the voltmeter. Ideally the measuring device should not affect the circuit parameters i ...