Search results
Results From The WOW.Com Content Network
Some metals that are generally described as ductile include gold and copper, while platinum is the most ductile of all metals in pure form. [4] However, not all metals experience ductile failure as some can be characterized with brittle failure like cast iron. Polymers generally can be viewed as ductile materials as they typically allow for ...
The failure of a material is usually classified into brittle failure or ductile failure . Depending on the conditions (such as temperature, state of stress, loading rate) most materials can fail in a brittle or ductile manner or both. However, for most practical situations, a material may be classified as either brittle or ductile.
Steel is a ductile material, which will behave elastically until it reaches yield (point 2 on the stress–strain curve), when it becomes plastic and will fail in a ductile manner (large strains, or extensions, before fracture at point 3 on the curve). Steel is equally strong in tension and compression.
The steel is then tempered, which is just a specialized type of annealing, to reduce brittleness. In this application the annealing (tempering) process transforms some of the martensite into cementite, or spheroidite and hence it reduces the internal stresses and defects. The result is a more ductile and fracture-resistant steel. [15]
Only spheroidized steel is softer and more ductile. [17] Process annealing A process used to relieve stress in a cold-worked carbon steel with less than 0.3% C. The steel is usually heated to 550 to 650 °C (1,000 to 1,200 °F) for 1 hour, but sometimes temperatures as high as 700 °C (1,300 °F). The image above shows the process annealing area.
The least brittle structural ceramics are silicon carbide (mainly by virtue of its high strength) and transformation-toughened zirconia. A different philosophy is used in composite materials, where brittle glass fibers, for example, are embedded in a ductile matrix such as polyester resin. When strained, cracks are formed at the glass–matrix ...
The properties of steel depend on its microstructure: the arrangement of different phases, some harder, some with greater ductility. At the atomic level, the four phases of auto steel include martensite (the hardest yet most brittle), bainite (less hard), ferrite (more ductile), and austenite (the most ductile). The phases are arranged by ...
Control-rolled HSLA steels usually have higher strength and toughness, as well as lower ductile-brittle transition temperature [14] and ductile fracture properties. [13] Below are some common micro-alloyed elements used to improve the mechanical properties. Effect of micro-alloyed elements