Search results
Results From The WOW.Com Content Network
The GM High Feature engine (also known as the HFV6, and including the 3600 LY7 and derivative LP1) is a family of modern DOHC V6 engines produced by General Motors.The series was introduced in 2004 with the Cadillac CTS and the Holden Commodore (VZ).
Since there is no room in the V between the cylinder banks for an intake system, all the intakes are on one side of the engine, and all the exhausts are on the other side. It uses a firing order of 1-5-3-6-2-4 (which is the firing order used by most straight-six engines), rather than the common V6 firing order of 1-2-3-4-5-6 or 1-6-5-4-3-2.
All the engines use a 1-6-5-4-3-2 firing order. [2] The engines in this family are longitudinal engines, and have been used in rear-wheel drive cars and trucks, industrial, and marine applications. Until 2014, the Chevrolet 90° V6 was produced at the GM Powertrain Division plant in Romulus, Michigan.
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
This was so named because it began with Chevrolet's V8 engines. Chevrolet big-block V8s; Chevrolet small-block V8s; GM Vortec 4300 90° V6; GM Iron Duke RWD inline 4 (early RWD Variants, later versions may use a FWD pattern, and have two possible starter locations) Jeep with GM Iron Duke inline 4 2.5L/151 in 3 (1980-1983).
The Group 1 engines were the smallest in displacement and outer dimensions, and differed most significantly from the larger Group 2 and Group 3 engines by having only four main bearings (whereas the Group 2 and 3 engines had seven) [1]: 15 and a different firing order (1-5-3-6-2-4, whereas the others are 1-4-2-6-3-5).
Introduced in 1981, the 2.8 L (2,837 cc) LH7 was a High Output ("Z-code") version of the LE2 for the higher-performance X-cars like the Chevrolet Citation X-11 and higher-performance A-cars like the Pontiac 6000 STE. It retained a two-barrel carburetor and produced 135 hp (101 kW) and 165 lb⋅ft (224 N⋅m) for 1981 and 145 lb⋅ft (197 N⋅m ...
The cylinder firing order was changed to 1-8-7-2-6-5-4-3 [46] so that the LS series now corresponds to the firing pattern of other modern V8 engines (for example the Ford Modular V8). 3.898 in. bore blocks (1997–2005)