Search results
Results From The WOW.Com Content Network
The engines operates on the 2-stroke cycle principle, are air started, and are rated at 1600 bhp at 756 rpm on the 16-248 and 750 rpm on the 16-278A. The size of the bore and stroke of the 16-248 engine is 8 + 1 ⁄ 2 inches and 10 + 1 ⁄ 2 inches respectively as compared to 8 + 3 ⁄ 4 inches and 10 + 1 ⁄ 2 inches for Model 16-278A.
The engine has a bore of 8-1/8 inches (206.4 mm), a stroke of 10 inches (254.0 mm) for each piston, and the cylinder height is 38 inches (970 mm). The engine block is of dry block construction. [ 1 ] They have been manufactured with between four and twelve cylinders, depending on application.
The Detroit Diesel Series 110 is a two-stroke diesel engine series, available in straight-6 cylinder configuration (in keeping with the standard Detroit Diesel practice at the time, engines were referred to using a concatenation of the number of cylinders and the displacement, so this was a model 6-110).
Cutaway model of a MAN B&W two-stroke marine diesel engine with the piston rod attached to a crosshead. In the two-stroke cycle, the four stages of internal combustion engine operation (intake, compression, ignition, exhaust) occur in one 360° revolution of the crank shaft, whereas in a four-stroke engine they take two complete revolutions.
One of the unique features of the 149 engine is its bore and stroke 5.75-by-5.75-inch (146 mm × 146 mm); hence, it is known as a square bore design. It has a relatively high power-to-weight ratio. The 20V149 TIB DDEC III SCCC in stand-by generator spec has an output of 2,936 hp (2,189 kW) from a capacity of 2,980 cu in (48.8 L).
The Series 92 engines were introduced in 1974. [8] Compared to the Series 71 engines they were derived from, the Series 92 featured a larger bore of 4.84025 ± 0.00125 in (122.942 ± 0.032 mm) and an identical stroke of 5 in (130 mm) for a nominal displacement per cylinder of 92 cu in (1,510 cc), from which the Series 92 derives its name.
The inline six-cylinder 71 series engine was introduced as the initial flagship product of the Detroit Diesel Engine Division of General Motors in 1938.. This engine was in high demand during WWII, necessitating a dramatic increase in output: about 57,000 6-71s were used on American landing craft, including 19,000 on LCVPs, about 8,000 on LCM Mk 3, and about 9,000 in quads on LCIs; and 39,000 ...
The EMD 710 is a line of diesel engines built by Electro-Motive Diesel (previously General Motors' Electro-Motive Division). The 710 series replaced the earlier EMD 645 series when the 645F series proved to be unreliable in the early 1980s 50-series locomotives which featured a maximum engine speed of 950 rpm.