Search results
Results From The WOW.Com Content Network
Because of variances in temperature and normal higher engine speed upon cold engine start up, it's normal to see higher oil pressure upon engine start up than at normal operating temperatures, where normal oil pressure usually falls between 30 and 45 psi. [7]
Also in 1957, General Motors introduced the Rochester Ramjet option, consisting of a fuel injection system for the V8 engine in the Chevrolet Corvette. During the 1960s, fuel injection systems were also produced by Hilborn, [43] SPICA [44] and Kugelfischer. Up until this time, the fuel injection systems had used a mechanical control system.
An engine operating at wide open throttle (WOT) on top of a very high mountain has a manifold pressure of about 50 kPa (essentially equal to the barometer at that high altitude). Condition 2: The same engine at sea level will achieve that same 50 kPa (7.25 psi, 14.7 inHG) of manifold pressure at less than (before reaching) WOT due to the higher ...
These include the timing of the intake valve(s) or fuel injector(s), the type of ignition system used, the type and condition of the spark plugs, the contents and impurities of the fuel, fuel temperature and pressure, engine speed and load, air and engine temperature, turbo boost pressure or intake air pressure, the components used in the ...
The grades with a W designation are considered Winter-grades, and denote an engine oil's low-temperature properties, while non-winter grades denote an engine oil's properties at the operating temperature of an engine. [5] The SAE 8 through SAE 16 viscosity grades describe oils that can improve fuel economy through reduced hydrodynamic friction ...
In manifold injection (as well as carburetors and throttle-body fuel injection), fuel can be added to the intake air mixture at any time. However a GDI engine is limited to injecting fuel during the intake and compression phases. This becomes a restriction at high engine speeds (RPM), when the duration of each combustion cycle is shorter.
First available on Navistar's 7.3L /444 cuin, V8 diesel engine. HEUI uses engine oil pressure to power high-pressure fuel injection, where the usual method of unit injector operation is with the engine camshaft. HEUI applications included the Ford 7.3L and 6.0L Power stroke used between May 1993 and 2007.
The upper operating temperature of an engine is limited by two main factors; the thermal operating limits of the materials, and the auto-ignition resistance of the fuel. All metals and alloys have a thermal operating limit, and there is significant research into ceramic materials that can be made with greater thermal stability and desirable ...