Ads
related to: air hose nozzles high pressure shut off fittings catalog download
Search results
Results From The WOW.Com Content Network
Bolt Shut-off Nozzle type BHP - pneumatic or hydraulic actuation. A shut-off bolt, positioned perpendicular to the melt channel moves up and down according to actuation, and thus shuts off/opens the melt flow. This nozzle type has a single melt channel. It therefore does not require rerouting of the melt around the shut-off mechanism.
Thermal shut off valve or Thermally released shut off valve, protects against excessive temperature, mandatory in the gas installation of some countries; Trap primer: sometimes include other types of valves, or are valves themselves; Vacuum breaker valve: prevents the back-siphonage of contaminated water into pressurized drinkable water supplies
Applied using eductor or compressed air foam system (CAFS) and pumped through fire hose to a foam nozzle (or sometimes a less-effective fog nozzle). Attack hose (Attack line) A use classification of a fire fighting hose connected to output of a pump or other pressure source (e.g., gravity). Fire hose used to apply water or other fire fighting ...
One side is connected to a flexible supply hose; the other may be attached to a manifold, valve, tool, or another hose. A female coupler is used on the supply side, and a male nipple is used on the receiving side. Fitting profiles have identifiable geometry on the male end, but care must be taken to use a compatible coupler.
While the hose is under pressure, it is inspected for leaks and to determine that the couplings are firmly attached. After testing the hose is drained, dried, rolled, and shipped to the customer. [17] Quality control. In addition to the final pressure testing, each hose is subjected to a variety of inspections and tests at each stage of ...
A push-in compression coupling and tee.. Push-to-pull, push-to-connect, push-in, push-fit, or instant fittings are a type of easily removed compression fitting or quick connect fitting that allows an air (or water) line to be attached, nominally without the use of tools (a tool is still usually required for cutting tubing to length and removal).