Ads
related to: air fuel ratio sniffer test
Search results
Results From The WOW.Com Content Network
Mixing ratio = weight of fuel / weight of air - Expressed as mass ratio: 14.7 kg of air per 1 kg. of fuel. - Expressed as volume ratio: 10,000 liters of air per 1 liter of fuel. With this relationship theoretically a complete combustion of gasoline is achieved and greenhouse gas emissions would be minimal. The coefficient is defined as Lambda ...
Air–fuel ratio (AFR) is the mass ratio of air to a solid, liquid, or gaseous fuel present in a combustion process. The combustion may take place in a controlled manner such as in an internal combustion engine or industrial furnace, or may result in an explosion (e.g., a dust explosion). The air–fuel ratio determines whether a mixture is ...
By monitoring EGT, the driver or pilot can get an idea of the vehicle's air-fuel ratio (AFR). At a stoichiometric air-fuel ratio, the exhaust gas temperature is different from that in a lean or rich air-fuel ratio. At rich air-fuel ratio, the exhaust gas temperature either increases or decreases depending on the fuel.
The heart of the Mitsubishi's MVV system is the linear air–fuel ratio exhaust gas oxygen sensor. Compared with standard oxygen sensors, which essentially are on-off switches set to a single air/fuel ratio, the lean oxygen sensor is more of a measurement device covering the air/fuel ratio range from about 15:1 to 26:1. [19]
An engine test stand is a facility used to develop, characterize and test engines. The facility, often offered as a product to automotive OEMs , allows engine operation in different operating regimes and offers measurement of several physical variables associated with the engine operation.
The ECU is a control system that uses feedback from the sensor to adjust the fuel/air mixture. As in all control systems, the time constant of the sensor is important; the ability of the ECU to control the fuel–air ratio depends upon the response time of the sensor. An aging or fouled sensor tends to have a slower response time, which can ...
The flow bench tests using only air while a real engine usually uses air mixed with fuel droplets and fuel vapor, which is significantly different. Evaporating fuel passing through the port-runner has the effect of adding gas to and lowering the temperature of the air stream along the runner and giving the outlet flow rate slightly higher than ...
As well as airbags, the air conditioning system, fuel system, and exhaust system require testing for leaks. Pacemakers and catheters have to be tested for efficacy and longevity. On planes, tracer-gas leak testing is used to quickly and safely locate fuel leaks, [3] as well as to check oxygen distribution devices and cabin pressurization systems.