Ad
related to: epoxy is not curing in cold storage and freezer ice maker
Search results
Results From The WOW.Com Content Network
The thermoset matrix is only partially cured to allow easy handling; this B-Stage material requires cold storage to prevent complete curing. B-Stage pre-preg is always stored in cooled areas since heat accelerates complete polymerization. Hence, composite structures built of pre-pregs will mostly require an oven or autoclave to cure.
Curing is a chemical process employed in polymer chemistry and process engineering that produces the toughening or hardening of a polymer material by cross-linking of polymer chains. [1] Even if it is strongly associated with the production of thermosetting polymers , the term "curing" can be used for all the processes where a solid product is ...
Curing of epoxy resins is an exothermic reaction and in some cases produces sufficient heat to cause thermal degradation if not controlled. [28] Curing does induce residual stress in epoxy systems which have been studied. [29] The induced stresses may be alleviated with flexibilisers. Curing may be achieved by reacting an epoxy with itself ...
Left: individual linear polymer chains Right: Polymer chains which have been cross linked to give a rigid 3D thermoset polymer. In materials science, a thermosetting polymer, often called a thermoset, is a polymer that is obtained by irreversibly hardening ("curing") a soft solid or viscous liquid prepolymer (). [1]
B-staging is a process that utilizes heat or UV light to remove the majority of solvent from an adhesive, thereby allowing a construction to be “staged”.In between adhesive application, assembly and curing, the product can be held for a period of time, without sacrificing performance.
A generic epoxide. In organic chemistry, an epoxide is a cyclic ether, where the ether forms a three-atom ring: two atoms of carbon and one atom of oxygen.This triangular structure has substantial ring strain, making epoxides highly reactive, more so than other ethers.
Epoxy value derives from the Epoxy equivalent weight (EEW) or Weight Per Epoxide (WPE) and is a measure of the epoxy content of an epoxy resin or epoxy reactive diluent, or glycidyl ether. [1] This is an important parameter as it allows determination of the correct mix ratio of an epoxy system with a curing agent. [ 2 ]
A cooling bath or ice bath, in laboratory chemistry practice, is a liquid mixture which is used to maintain low temperatures, typically between 13 °C and −196 °C. These low temperatures are used to collect liquids after distillation , to remove solvents using a rotary evaporator , or to perform a chemical reaction below room temperature ...