Ads
related to: wire for high temperature applications examples
Search results
Results From The WOW.Com Content Network
Critical temperature T c, the temperature below which the wire becomes a superconductor; Critical current density J c, the maximum current a superconducting wire can carry per unit cross-sectional area (see images below for examples with 20 kA/cm 2). Superconducting wires/tapes/cables usually consist of two key features:
The second class of high-temperature superconductors in the practical classification is the iron-based compounds. [8] [9] Magnesium diboride is sometimes included in high-temperature superconductors: It is relatively simple to manufacture, but it superconducts only below 39 K (−234.2 °C), which makes it unsuitable for liquid nitrogen cooling.
The suburban Long Island electrical substation is fed by a 2,000 foot (600 m) underground cable system which consists of about 99 miles (159 km) of high-temperature superconductor wire manufactured by American Superconductor chilled to −371 °F (−223.9 °C; 49.3 K) with liquid nitrogen, [dubious – discuss] greatly reducing the cost ...
Wire that is approved to BS 6231 might not carry the UL and CSA ratings, if, for example, the wire is not suitable for use at the higher 105 °C temperature that is specified for those ratings. In that case, the wire is not tri-rated. According to UL 758, the maximum operating temperature of tri-rated cable is 105 °C. British Standard BS 6231 ...
BSCCO superconductors already have large-scale applications. For example, tens of kilometers of BSCCO-2223 at 77 K superconducting wires are being used in the current leads of the Large Hadron Collider at CERN [10] (but the main field coils are using metallic lower temperature superconductors, mainly based on niobium–tin).
Kanthal (Alloy 875/815), a family of iron-chromium-aluminium (FeCrAl) alloys, is used in a wide range of high-temperature applications, up to about 1,425 °C (2,597 °F). One difficulty in using nichrome or kanthal wire is that common tin-based electrical solder will not bond with it, so the connections to the electrical power must be made ...