Ads
related to: high speed router for spectrum
Search results
Results From The WOW.Com Content Network
Very high-speed digital subscriber line (VDSL) [1] and very high-speed digital subscriber line 2 (VDSL2) [2] are digital subscriber line (DSL) technologies providing data transmission faster than the earlier standards of asymmetric digital subscriber line (ADSL) G.992.1, G.992.3 (ADSL2) and G.992.5 (ADSL2+).
Modern ADSL filter/splitter (left) and filter (right). ADSL works by using spectrum above the band used by voice telephone calls. [1] With a DSL filter, often called splitter, the frequency bands are isolated, permitting a single telephone line to be used for both ADSL service and telephone calls at the same time.
High-bit-rate digital subscriber line (HDSL), ITU-T G.991.1, the first DSL technology that used a higher frequency spectrum than ISDN, 1,544 kbit/s and 2,048 kbit/s symmetric services, either on 2 or 3 pairs at 784 kbit/s each, 2 pairs at 1,168 kbit/s each, or one pair at 2,320 kbit/s
Reboot your modem/router - Sometimes the old "turn it off and on again" approach actually does work! Just wait about five minutes before turning it back on to make sure everything was reset. Just wait about five minutes before turning it back on to make sure everything was reset.
A cable modem termination system (CMTS, also called a CMTS Edge Router) [1] is a piece of equipment, typically located in a cable company's headend or hubsite, which is used to provide data services, such as cable Internet or Voice over IP, to cable subscribers.
Originally the word "broadband" had a technical meaning, but became a marketing term for any kind of relatively high-speed computer network or Internet access technology. According to the 802.16-2004 standard, broadband means "having instantaneous bandwidths greater than 1 MHz and supporting data rates greater than about 1.5 Mbit /s."