Ads
related to: ford 6.2 intake manifold problems
Search results
Results From The WOW.Com Content Network
A limited-edition version of the Raptor from Ford Racing called the Raptor XT features a high-output version of the 6.2 L V8 with about 500 hp (370 kW). [3] For the 2011 model year, the 6.2 L V8 was introduced in the Ford F-250 and F-350 Super Duty as a replacement for both the 5.4 L Triton V8 and the 6.8 L Triton V10, and in the F-150 as the ...
In the late model engines, Ford also redesigned the HPO stand pipes and dummy plugs in the HPO manifold, using poor-quality O-rings. These O-rings were prone to failure causing a HPO leak, and eventually a no-start condition. Ford addressed this concern with updated Viton O-ring washers fixing the issue.
Ford later used versions of the DOHC 4-valve 5.4 L in the 2000 Ford Mustang SVT Cobra R, the Ford GT supercar, and the Ford Shelby GT500. The DOHC 4-valve 5.4 L was also used in the Ford Falcon line in Australia under the Boss moniker until 2010, when it was replaced by a locally developed, supercharged version of the 5.0 litre Modular V8.
A common failure point on the Crown Victoria Police Interceptor was the intake manifold. Beginning in 1996, Ford used a plastic intake manifold manufactured by DuPont, which also had an integral plastic thermostat housing and anti-freeze crossover. As these vehicles were commonly used for emergency style driving and often endured long idling ...
It also features higher flowing cylinder heads sourced from the L92, a more aggressive camshaft with 0.551 in (14 mm) lift, a 10.7:1 compression ratio, a revised valvetrain with 0.236 in (6 mm) offset intake rocker arms, a high-flow intake manifold, and 47 lb (21 kg)/hour fuel injectors from the LS7 engine.
2012–present; The 3.2 is an I5 engine used in the Ford Transit, the Ford Ranger, Ford Everest, Mazda BT-50 and the Vivarail. For the North American-spec Transit, * the 3.2 L Duratorq is modified to meet American and Canadian emissions standards and is branded as a Power Stroke engine.
Ford's Split Port Induction (SPI) system is a form of variable-length intake manifold. In this system, the intake path to each intake valve is split into primary and secondary passages. The primary passage contains the injector for the cylinder, and introduces the air tangentially to the cylinder for maximum swirl.
They can be distinguished by the Dover's higher specifications, with an aluminium rather than a pressed steel manifold, straight-cut gears, and larger ports in the head. The engine code is also different, 2711 for the Dorset and 2722E for the Dover. [2] The Dorset engine was built in Ford Dagenham in Essex, UK. [3]