Search results
Results From The WOW.Com Content Network
Angular field of view is typically specified in degrees, while linear field of view is a ratio of lengths. For example, binoculars with a 5.8 degree (angular) field of view might be advertised as having a (linear) field of view of 102 mm per meter. As long as the FOV is less than about 10 degrees or so, the following approximation formulas ...
A high-power field (HPF), when used in relation to microscopy, references the field of view under the maximum magnification power of the objective being used. Often, this represents a 400-fold magnification when referenced in scientific papers.
Because their images have constant magnification and constant viewing angle across the field of view, object-space telecentric lenses are used for metrology applications, where a machine vision system must determine the precise size and shape of objects independently from their exact distance and position within the field of view.
Apparent field of view differs from true field of view in so far as true field of view varies with magnification, whereas apparent field of view does not. The wider field stop of a wide angle eyepiece permits the viewing of a wider section of the real image formed at the telescope's focal plane, thus impacting the calculated true field of view.
A lower magnification facilitates a larger field of view which is useful in viewing the Milky Way and large nebulous objects (referred to as deep sky objects) such as the nebulae and galaxies. The large (typical 7.14 mm using 7×50) exit pupil [objective (mm)/power] of these devices results in a small portion of the gathered light not being ...
At this magnification, the field of view is relatively wide, making it easier to locate and follow distant objects. For viewing at longer distances, 10× or 12× is preferable if the user is able to hold the monocular steady. However, increasing magnification will compromise the field of view and the relative brightness of the object.
It is used interchangeably with the more general term field of view. It is important to distinguish the angle of view from the angle of coverage, which describes the angle range that a lens can image on a given image sensor or film location (the image plane). In other words, the angle of coverage is determined by the lens and the image plane ...
The resulting image however will have a different field of view. If the focal length is altered to maintain the field of view, while holding the f-number constant, the change in focal length will counter the decrease of DOF from the smaller sensor and increase the depth of field (also by the crop factor).