When.com Web Search

  1. Ads

    related to: gallons per minute tester for plants

Search results

  1. Results From The WOW.Com Content Network
  2. GE BWR - Wikipedia

    en.wikipedia.org/wiki/GE_BWR

    Variable speed pumps were replaced with two-speed pumps (each rated at 35,400 US gallons per minute (2.23 m 3 /s) for a discharge pressure head of 865 feet (264 m)), and a flow control valve (adjustable from 22% open to 100% open with a linear flow response) was added to each loop for use in regulating recirculation flow (capable of regulating ...

  3. Water flow test - Wikipedia

    en.wikipedia.org/wiki/Water_flow_test

    where: [2] Q f = total residual flow during the test (gallons per minute); c = discharge coefficient (unitless). This is usually 1.0 if using a diffuser. If using a wand to measure the stagnation pressure, the coefficient value depends on the shape of the flow hydrant orifice.

  4. Hanford Site - Wikipedia

    en.wikipedia.org/wiki/Hanford_Site

    A clean and abundant water supply (at least 25,000 US gallons per minute (1,600 L/s)) A large electric power supply (about 100,000 kW) A "hazardous manufacturing area" of at least 12 by 16 miles (19 by 26 km) Space for laboratory facilities at least 8 miles (13 km) from the nearest reactor or separations plant

  5. Palo Verde Nuclear Generating Station - Wikipedia

    en.wikipedia.org/wiki/Palo_Verde_Nuclear...

    Palo Verde generates the most electricity of any power plant in the United States per year, and is the largest power plant by net generation as of 2021. [6] Palo Verde has the third-highest rated capacity of any U.S power plant. It is a critical asset to the Southwest, generating approximately 32 million megawatt-hours annually.

  6. JEA Northside Generating Station - Wikipedia

    en.wikipedia.org/wiki/JEA_Northside_Generating...

    Operation of the entire 3-unit plant occurred only from about 1978 until 1980. During that time, the demand for cooling water was approximately 827 Mgd (574,000 US gallons (2,170 m 3) per minute): 24.5% for Unit 1, 24.5% for Unit 2, and 51% for Unit 3. This amount of surface water supplied to the station was approximately 10% of the average ...

  7. Specific speed - Wikipedia

    en.wikipedia.org/wiki/Specific_speed

    In Imperial units it is defined as the speed in revolutions per minute at which a geometrically similar impeller would operate if it were of such a size as to deliver one gallon per minute against one foot of hydraulic head. In metric units flow may be in l/s or m 3 /s and head in m, and care must be taken to state the units used.

  1. Ad

    related to: gallons per minute tester for plants