Search results
Results From The WOW.Com Content Network
A thermal switch (sometimes thermal reset or thermal cutout (TCO)) is a device which normally opens at a high temperature (often with a faint "plink" sound) and re-closes when the temperature drops. The thermal switch may be a bimetallic strip, often encased in a tubular glass bulb to protect it from dust or short circuit. Another common design ...
Later thermionic vacuum tubes, mostly miniature style, some with top cap connections for higher voltages. A vacuum tube, electron tube, [1] [2] [3] valve (British usage), or tube (North America) [4] is a device that controls electric current flow in a high vacuum between electrodes to which an electric potential difference has been applied.
Valve receiver made by Marconi Co. has two Fleming valves, in case one burns out The valve consists of an evacuated glass bulb containing two electrodes : a cathode in the form of a " filament ", a loop of carbon or fine tungsten wire, similar to that used in the light bulbs of the time, and an anode ( plate ) consisting of a sheet metal plate.
A thermal expansion valve or thermostatic expansion valve (often abbreviated as TEV, TXV, or TX valve) is a component in vapor-compression refrigeration and air conditioning systems that controls the amount of refrigerant released into the evaporator and is intended to regulate the superheat of the refrigerant that flows out of the evaporator ...
Lamplough's 'valve' was a form of rocker switch, on which were mounted two glass bulbs, one black, the other clear, part-filled with liquid ether and linked by a tube. During the day, heat from the sunlight would cause the air in the black bulb to expand, forcing the liquid into the clear bulb, the additional weight tipping the switch and ...
The grid is constructed of a helix or screen of thin wires surrounding the cathode. The anode is a cylinder or rectangular box of sheet metal surrounding the grid. It is blackened to radiate heat and is often equipped with heat-radiating fins. The electrons travel in a radial direction, from cathode through the grid to the anode.
The most efficient valve-based RF amplifiers operate class C. If used with no tuned circuit in the output, this would distort the input signal, producing harmonics. However, class C amplifiers normally use a high Q output network which removes the harmonics, leaving an undistorted sine wave identical to the input waveform.
Most of the electricity in an LED becomes heat rather than light – about 70% heat and 30% light. [1] If this heat is not removed, the LEDs run at high temperatures, which not only lowers their efficiency, but also makes the LED less reliable, shortens its lifespan. Thus, thermal management of high power LEDs is a crucial area of the research ...