Ads
related to: road bike bottom bracket
Search results
Results From The WOW.Com Content Network
Aerozine ceramic external bottom bracket bearing cups for BSC/ISO standard, that is M34.798×1.058 mm (1.37″-24 TPI) threads and a 68 mm wide bottom bracket shell. The bottom bracket on a bicycle connects the crankset (chainset) to the bicycle and allows the crankset to rotate freely.
Chainstay: a pair of tubes on a bicycle frame that runs from the bottom bracket to the rear fork ends; Chain tensioner: a device to maintain proper chain tension; Chaintug: a device to aid in setting the proper chain tension; Cluster: a bicycle cogset, either a freewheel, or cassette
The bottom bracket shell is a short and large diameter tube, relative to the other tubes in the frame, that runs side to side and holds the bottom bracket. It is usually threaded, often left-hand threaded on the right (drive) side of the bike to prevent loosening by fretting induced precession , and right-hand threaded on the left (non-drive) side.
The key products offered by Kogel Bearings are hybrid ceramic bearings with specific seals for road and off-road use. Off-road seals are designed for cyclocross and mountain bike configurations. With these bearings, the company produces a line of bottom brackets, derailleur pulleys and wheel bearing sets.
Cannondale developed a proprietary bottom bracket and crankset technology called Hollowgram which has been featured in its high-end bikes since 2001. The crank and bottom bracket set weigh 80 grams less and are 10% stiffer than Dura-Ace (FC-7800). [17] The hollowgram bottom bracket shell can accept standard 68 mm English-threaded bottom bracket ...
Black plastic cable guide on the bottom of a Trek 5000 bottom bracket shell Metal, braze-on cable guide on the top of a bottom bracket shell. A cable guide is a fitting or part of a bicycle frame which guides a piece of bare inner bowden cable around a corner. Most multi-speed bicycles have cable guides to get the derailleur cables past the ...