Search results
Results From The WOW.Com Content Network
The police package (9C1) B-body cars featured a First Gear Block Out (FGBO) Plate on the transmission housing to prevent drivetrain damage. The shift point for first to second gear is about 43 MPH (69 km/h) while second to third gear shift point is about 83 MPH (134 km/h) assuming a 3.08:1 differential and a 5,500 RPM engine speed limit.
The 2.2l S10/Sonoma had the starter located in the same position as front wheel drive cars. A rear wheel drive bellhousing is displayed at right, and the integrated front wheel drive bellhousing is displayed at the lower right (in this case, as a part of the GM 6T70 Transmission). GM 60-Degree 2.8/3.1/3.4/3.5/3.9 L V6 (also used by AMC) Buick ...
The LE9 5.0 L (305 cu in) was a version of the 305 with a four-barrel 650 cu ft/min (18 m 3 /min) carburetor and equipped with electronic spark control (ESC), [34] a 9.2-9.5:1 compression ratio, the LM1 cam and 14010201 casting heads featuring 1.84/1.50" valves, and 53 cc (3.2 cu in) chambers. The engine produced 165 hp (123 kW) at 4,400 and ...
The "LS" nomenclature originally came from the Regular Production Option (RPO) code LS1, assigned to the first engine in the Gen III engine series. The LS nickname has since been used to refer generally to all Gen III and IV engines, [14] but that practice can be misleading, since not all engine RPO codes in those generations begin with LS. [15]
1.8, 2.0/2.3 had the same bellhousings bolt patterns with differences from year to year to be wary of. The Mazda transmission 5M** does not "directly replace" the Mitsubishi transmissions as there are shifter spacing differences in the floorboard. The Mitsubishi transmission was made to fit Mustang IIs and was shoehorned into the early Rangers.
A Hydra-Matic 4L80 transmission at the Ypsilanti Automotive Heritage Museum The 4L80-E ( RPO MT1) is rated to handle engines with up to 440 ft·lbf (597 N·m) of torque. [ 2 ] The 4L80-E is rated to a maximum GVWR of 18,000 lb, depending on the axle and vehicle.
The Saturn MP Transmission were a series of 5-speed manual and 4-speed automatic transmissions that were manufactured by Saturn Corporation exclusively for the S-Series. They were designed for transverse engine applications and was deployed in vehicles that output up to 122 ft·lbf of engine torque.
The shift from 1st to 2nd or 2nd to 3rd range was long and drawn-out, ending with a harsh shift. The reason for this was that three things were happening. Not only was the transmission shifting to a very much higher range ( 2.93 to 1.56, but it was also simultaneously emptying the fluid coupling and making a mechanical lock-up.