Search results
Results From The WOW.Com Content Network
Since the electric pump does not require mechanical power from the engine, it is feasible to locate the pump anywhere between the engine and the fuel tank. The reasons that the fuel pump is typically located in the fuel tank are: By submerging the pump in fuel at the bottom of the tank, the pump is cooled by the surrounding fuel
A gasoline pump or fuel dispenser is a machine at a filling station that is used to pump gasoline (petrol), diesel, or other types of liquid fuel into vehicles. Gasoline pumps are also known as bowsers or petrol bowsers (in Australia and South Africa ), [ 2 ] [ 3 ] petrol pumps (in Commonwealth countries), or gas pumps (in North America ).
In spark-ignition internal combustion engines, knocking (also knock, detonation, spark knock, pinging or pinking) occurs when combustion of some of the air/fuel mixture in the cylinder does not result from propagation of the flame front ignited by the spark plug, but when one or more pockets of air/fuel mixture explode outside the envelope of the normal combustion front.
This permits the maximum flow of air through the engine, flushing the overly rich fuel mixture out of the exhaust. If the exhaust system is hot enough to autoignite, an after-fire may result; this can be seen as a flame discharging through the exhaust system. On a fuel-injected engine, ignoring the throttle (no fuel) while starting permits ...
The vast majority of vehicles manufactured after 1987 are fuel-injected: the injectors and high-pressure fuel pump immediately cease supplying fuel to the cylinders when the ignition is switched off. If the injector is damaged or dirty, a small amount of fuel can enter the chamber and be ignited, causing a sputter or two after the engine is ...
Installation for saving of heavy fuel on boilers, utilization of condensate water and heavy residuals of fuel in tankfarm waste oil residues and oiled condensate water in ports and tank farms; sludge - dispersion and utilisation as fuel
In metallurgy, gas flushing removes dissolved gases from the molten metal prior to the material being processed. [2] [3] For example, before casting aluminium alloys, argon bubbles are injected into liquid aluminium using a rotary degasser. The argon bubbles rise to the surface, bringing with them some of the dissolved hydrogen.
The engine needs a fuel tank and an automatic controller that will start the booster pump when it is needed. A small auxiliary electrically-powered booster pump (called a "jockey pump") is often included in the system to maintain the sprinkler pipes at sufficient pressure, without requiring startup of the large diesel engine.