Ads
related to: 3.73 rear axle ratio
Search results
Results From The WOW.Com Content Network
Gear ratios were 3.73 in 4x4 and either the 3.73 or 4.10 in the two-wheel-drive models. This was available in both limited slip and standard variations. All 4x4 came with limited slip (L on tag), it can also be determined from the axle code on the door jamb vin label.
Dana 61 axle tag showing 3.73:1 ratio [1] The Dana 61 was made in semi-float and full-float axles for select 4×2 and 4x4 Ford 3 ⁄ 4 -ton and 1 Ton Pickups and Vans from 1974 to 1987. A Dana 61 front axle was selectively used in Dodge 4×4 3 ⁄ 4 -ton and 1 Ton pickups from 1987 to 1993.
It can be identified by its straight axle tubes, 10 bolt asymmetrical cover, and a "80" cast into the housing. Dana 80's are made as full floating, rear axles only and are a step up in overall strength compared to the Dana 70. 1988 Ford was the first company to use the Dana 80.
Towing capacity for the 2500HD is rated at 16,100 pounds (7,300 kg) with the gasoline 8.1 L V8 and 3.73:1 rear axle ratio, and payload capacity was rated at 3,964 pounds (1,798 kg) in the bed depending on options.
The rear axle for all Excursions was a Sterling 10.5 axle. The four-wheel-drive models had an NV273 transfer case and Dana 50 front axle. Rear axle ratios of 3.73:1 ...
From 1999 to 2000, the rear axle ratio was 3.55:1, shortened to 3.73:1 in 2001. The same year, a 4.5-inch (110 mm) aluminum driveshaft replaced a 3.5-inch (89 mm) steel unit. [citation needed] Following the 2001 drivetrain revisions, Car and Driver magazine tested a Lightning, accelerating from 0–60 mph (97 km/h) in 5.2 seconds.
The front suspension geometry was modified, 15:1 ratio power-assisted rack-and-pinion steering system replaced the standard system, a limited-slip, 3.45:1, 7.5" Traction-Lok rear axle was added for the first year of production (later models used a 3.73:1 ratio, 7.5" axle), a new, ventilated four-wheel-disc braking system (sourced from Fox ...
The Dana 44 rear axle first saw use in the 1940s and is still in use today. The Dana 44 has a GAWR up to 3,500 lb (1,600 kg) and is a semi-floating type, having one bearing on the end of the axle shaft which carries the weight of the vehicle on the axle and also allows axle rotation.