Search results
Results From The WOW.Com Content Network
The input pressure is set for 80 psi (550 kPa), and 60 psi (410 kPa) minimum cylinder pressure is the accepted standard. While the leak-down tester pressurizes the cylinder, the mechanic can listen to various parts to determine where any leak may originate.
It has four valves per cylinder, utilizes dual-overhead cams design, and features variable valve timing on the exhaust cam, a first for GM inline engines. When introduced, this engine's power was 270 hp (201 kW) at 6,000 rpm and torque was 275 lb⋅ft (373 N⋅m) at 3,600 rpm. 2003 saw a slight bump in power to 275 hp (205 kW), while torque was ...
The GM Ecotec engine, also known by its codename L850, is a family of all-aluminium inline-four engines, displacing between 1.2 and 2.5 litres.Confusingly, the Ecotec name was also applied to both the Buick V6 Engine when used in Holden Vehicles, as well as the final DOHC derivatives of the previous GM Family II engine; the architecture was substantially re-engineered for this new Ecotec ...
An evolution of the 1964 DOHC prototype “XJ13” engine, the Jaguar V12 engine is a family of SOHC internal combustion V12 engines with a common block design, that were mass-produced by Jaguar Cars for a quarter of a century, from 1971 to 1997, mostly as 5.3‑litres, but later also as 6‑litres, and 7‑litre versions that were deployed in racing.
The 1.8 L CVH was only used in the European Ford Sierra. Bore is the same 80 mm (3.15 in) as the 1.6 L CVH, but a different crankshaft with a stroke of 88 mm (3.46 in) raises displacement to 1,769 cc (108.0 cu in). The cylinder head is equipped with hydraulic roller camshaft followers to reduce noise.
Cylinder bore: V6 3.5: 3.64 in (92.5 mm) ... may fail resulting in a loss of oil pressure causing severe engine damage and/or lockup and loss of power braking assist ...
2004–2011;The 2.5 Duratec is an inline 5 engine used in the Ford Focus ST225,Kuga,S-Max ST and various Volvo T5 models.It features DOHC, 20 valves and Ti-VCT.It displaces 2521cc and produces 166 kW (225hp) and 320 N.m (236lb.ft) in the ST or 227 kW (305hp) and 440 N.m (324.5lb.ft) in the Focus RS, or even up to 257kW (345hp) and 460 N.m ...
The LT4 engine is based on the same Gen 5 small block foundation as the Corvette Stingray's LT1 6.2L naturally aspirated engine, incorporating several unique features designed to support its higher output and the greater cylinder pressures created by forced induction, including: Rotocast A356T6 aluminum cylinder heads that are stronger and ...