Ads
related to: chevy 350 engine rebuild manual for 1999 porsche 2 5l engine specs
Search results
Results From The WOW.Com Content Network
All engines in this family share the same block dimensions and sometimes even the same casting number; the latter meaning engines were of the same block, but with different strokes (e.g., the casting number 3970010 was used by all three engines: 302, 327, and 350). This engine family was updated in 1968 for the use of 2.45 in (62.2 mm) medium ...
Jeep with GM Iron Duke inline 4 2.5L/151 in 3 (1980-1983). These use a Chrysler custom Torqueflite 904 automatic transmission with an integral Chevrolet bellhousing. Do not confuse with later AMC 2.5 L engine that uses GM small corporate pattern . Chevrolet Turbo-Thrift engine (post-1962) Chevrolet 153 Inline 4 (Chevy II, pre-Iron-Duke ...
Vehicle Type Type MY Engine numbers Technical data Cayenne S M48.00 03 3 813 00501>60000 8 Cyl/4,5L /250 KW Cayenne Turbo M48.50 03 3 823 00501>60000 8 Cyl/4,5L /331 KW Cayenne M02.2Y 04 4 BFD 00501>60000 6 Cyl/3,2L /184 KW Cayenne S M48.00 04 4 814 00501>60000 8 Cyl/4,5L /250 KW Cayenne Turbo M48.50 04 4 824 00501>60000 8 Cyl/4,5L /331 KW ...
It was the first Atlas engine, and was introduced in 2002 for the Chevrolet TrailBlazer, GMC Envoy, and Oldsmobile Bravada. The engine was also used in the Buick Rainier, Saab 9-7X, and Isuzu Ascender. It displaces 4.2 L (4,160 cc; 253.9 cu in), with a 93 mm × 102 mm (3.66 in × 4.02 in) bore and stroke.
The LQ1 (also called the Twin Dual Cam or TDC) was a 3.4 L (3,350 cc) DOHC V6 engine ("X-code") based on the aluminum-headed second generation of GM's 60° engine line, sharing a similar block with its pushrod cousins, the 3.1 L LH0 V6 and the then recently retired 2.8 L (2,837 cc) LB6 V6.
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.