Search results
Results From The WOW.Com Content Network
The blue-coloured epoxy on the left is still undergoing curing. Epoxy adhesives are a major part of the class of adhesives called "structural adhesives" or "engineering adhesives" (that includes polyurethane, acrylic, cyanoacrylate, and other chemistries.) These high-performance adhesives are used in the construction of aircraft, automobiles ...
Curing is a chemical process employed in polymer chemistry and process engineering that produces the toughening or hardening of a polymer material by cross-linking of polymer chains. [1] Even if it is strongly associated with the production of thermosetting polymers , the term "curing" can be used for all the processes where a solid product is ...
The exposure time is a function of exposure dose and film thickness. After exposure the SU-8 needs to be baked again to complete the polymerization. This baking step is not as critical as the prebake but the rising of the temperature (again to 95 °C) needs to be slow and controlled. At this point the resist is ready to be developed.
In materials science, a thermosetting polymer, often called a thermoset, is a polymer that is obtained by irreversibly hardening ("curing") a soft solid or viscous liquid prepolymer . [1] Curing is induced by heat or suitable radiation and may be promoted by high pressure or mixing with a catalyst .
Pre-preg also allows one to impregnate a bulk amount of fiber and then store it in a cooled area (below 20 °C) for an extended period of time to cure later. The process can also be time consuming in comparison to the hot injection process and the added value for pre-preg preparation is at the stage of the material supplier.
Diethylenetriamine is a common curing agent for epoxy resins in epoxy adhesives and other thermosets. [4] It is N-alkylated upon reaction with epoxide groups forming crosslinks. Structure of a triamine-cured epoxy glue. The resin's epoxide groups have all reacted with the hardener.
Non-linear polymers and copolymers, and polymer assemblies are named using the italicized qualifiers in Table 2. [5] The qualifier, such as branch, is used as a prefix (P) when naming a (co)polymer, or as a connective (C), e.g., comb, between two polymer names.
The result of heating up benzoxazine monomers is a high molecular weight thermoset polymer matrix. Composites of it are used where enhanced mechanical performance, flame and fire resistance compared to epoxy and phenolic resins is required. [2] Polybenzoxazines are a class of halogen-free high-performance polymers.