Ad
related to: square inches to diameter converter
Search results
Results From The WOW.Com Content Network
As a unit of area, the circular mil can be converted to other units such as square inches or square millimetres. 1 circular mil is approximately equal to: 0.7854 square mils (1 square mil is about 1.273 circular mils) 7.854 × 10 −7 square inches (1 square inch is about 1.273 million circular mils) 5.067 × 10 −10 square metres
No. 7/0, the largest size, is 0.50 inches (500 mils or 12.7 mm) in diameter (250 000 circular mils in cross-sectional area), and the smallest, No. 50, is 0.001 inches (1 mil or 25.4 μm) in diameter (1 circular mil [cross-sectional area] or 0.7854 millionths of a square inch). Between each step the diameter, or thickness, diminishes by 10.557% ...
The following symbols are used to denote square inches: square in; sq inches, sq inch, sq in; inches/-2, inch/-2, in/-2; inches^2, inch^2, in^2; inches 2, inch 2, in 2 (also denoted by "2) historic engineering drawings ″ (number with a square & a double apostrophe, both as an exponent) The square inch is a common unit of measurement in the ...
1 square mil is equal to: 1 millionth of a square inch (1 square inch is equal to 1 million square mils) 6.4516 × 10 −10 square metres; about 1.273 circular mils (1 circular mil is equal to about 0.7854 square mils). 1.273 ≈ 4 / π and 0.7854 ≈ π / 4 .
SD g/mm 2 is the sectional density in grams per square millimeters; m g is the mass of the projectile in grams; d mm is the diameter of the projectile in millimeters; For example, a small arms bullet with a mass of 10.4 grams (160 gr) and having a diameter of 6.70 mm (0.264 in) has a sectional density of: 4 · 10.4 / (π·6.7 2) = 0.295 g/mm 2
Copper tubing, however, is measured in nominal size, 1 ⁄ 8 inch less than the outside diameter. The Schedule system is used for standard pipe thicknesses. Alcohol content is frequently given in proof, 2 × percent alcohol by volume; The cord is used for volume of firewood. The square is used to mean 100 square feet in construction.
Originally in 1945, the divisions were based on the ring inside diameter in steps of 1 ⁄ 64 inch (0.40 mm). [6] However, in 1987 BSI updated the standard to the metric system so that one alphabetical size division equals 1.25 mm of circumferential length. For a baseline, ring size C has a circumference of 40 mm. [7]
The United States adopted the conversion factor 1 metre = 39.37 inches by an act in 1866. [30] In 1893, Mendenhall ordered the physical realization of the inch to be based on the international prototype metres numbers 21 and 27, which had been received from the CGPM, together with the previously adopted conversion factor. [31]