Ads
related to: flood light 200 watt philips 50
Search results
Results From The WOW.Com Content Network
The most common type of floodlight was the metal-halide lamp, which emits a bright white light (typically 75–100 lumens/Watt). Sodium-vapor lamps are also commonly used for sporting events, as they have a very high lumen to watt ratio (typically 80–140 lumens/Watt), making them a cost-effective choice when certain lux levels must be provided. [4]
For example, a high pressure sodium lamp has an arc tube under 100 to 200 torr pressure, about 14% to 28% of atmospheric pressure; some automotive HID headlamps have up to 50 bar or fifty times atmospheric pressure. Metal halide lamps produce almost white light, and attain 100 lumen per watt light output. Applications include indoor lighting of ...
When the lamp is first started, it emits a dim red/pink light to warm the sodium metal; within a few minutes as the sodium metal vaporizes, the emission becomes the common bright yellow. These lamps produce a virtually monochromatic light averaging a 589.3 nm wavelength (actually two dominant spectral lines very close together at 589.0 and 589. ...
A 230-volt LED filament lamp, with an E27 base. The filaments are visible as the eight yellow vertical lines. An assortment of LED lamps commercially available in 2010: floodlight fixtures (left), reading light (center), household lamps (center right and bottom), and low-power accent light (right) applications An 80W Chips on board (COB) LED module from an industrial light luminaire, thermally ...
Available in numerous spot and flood beam spreads. Like all light bulbs, the number represents the diameter of the bulb in 1 ⁄ 8 of an inch. Therefore, a PAR 16 is 51 mm (2 in) in diameter, a PAR 20 is 64 mm (2.5 in) in diameter, PAR 30 is 95 mm (3.75 in) and a PAR 38 is 121 mm (4.75 in) in diameter. A package of four 60-watt light bulbs
The heat generated by the arc and electrodes then ionizes the mercury and metal halides into a plasma, which produces an increasingly brighter white light as the temperature and pressure increases to operating conditions. The arc-tube operates at anywhere from 5–50 atm or more [8] (70–700 psi or 500–5000 kPa) and 1000–3000 °C. [9]