Ads
related to: yamalube 4 10w30 motorcycle oil change
Search results
Results From The WOW.Com Content Network
The oil is dyed blue to make it easier to recognize in the gasoline. It appears black in this bottle because it is not diluted. Two-stroke oil (also referred to as two-cycle oil, 2-cycle oil, 2T oil, or 2-stroke oil) is a special type of motor oil intended for use in crankcase compression two-stroke engines, typical of small gasoline-powered ...
The motorcycle division of Yamaha was spun off in 1955, being incorporated on 1 July 1955 in Japan, [7] and was headed by Genichi Kawakami. Yamaha's initial product was a 125 cc (7.6 cu in) two-stroke , single cylinder motorcycle, the YA-1 , which was a copy of the German DKW RT 125 .
The International Lubricant Standardization and Approval Committee (ILSAC) also has standards for motor oil. Introduced in 2004, GF-4 [27] applies to SAE 0W-20, 5W-20, 0W-30, 5W-30, and 10W-30 viscosity grade oils. In general, ILSAC works with API in creating the newest gasoline oil specification, with ILSAC adding an extra requirement of fuel ...
In the engine oil family, there are four basic oil sub-families: Multigrade conventional oil—in SAE 10W-30 and 15W-40 viscosity ranges; Multigrade synthetic oil—in SAE 5W-40 and 15w-40 viscosity ranges [3] Single grade conventional oil—in SAE 20, 30, 40 and 50; Synthetic blend oil
The oil collects in sump (1), is withdrawn continuously by scavenge pump (2) and travels to the oil tank (3), where gases entrained in the oil separate and the oil cools. Gases (6) are returned to the engine sump. Pressure pump (4) forces the de-gassed and cooled oil (5) back to the engine's lubrication points (7).
Oil cooling is the use of engine oil as a coolant, typically to remove surplus heat from an internal combustion engine. The hot engine transfers heat to the oil which then usually passes through a heat-exchanger, typically a type of radiator known as an oil cooler. The cooled oil flows back into the hot object to cool it continuously.